How to replace an electrical breaker yourself? |5 Simple steps

Power Crisis in our life are disturbing but if you have the right tools and skills to manage the issues, there will be no difficulty at all. If you are facing the dilemma of a fused circuit breaker but don’t know what to do about it, learn to do it yourself in a few easy steps and use these tools in the process:

• A safety standing place so that you can withstand an electrical shock in case it happens.
• A good quality screwdriver
• Tool for wire stripping
• Flashlight for a better view
• A testing device for voltage
• Cable connectors
• Most importantly a new breaker of the same size, shape, design, brand, and power.

After you have gathered all these essential gear, then focus on the task, gather all your confidence and vigilance for this job. If you get cold feet then contact a company for electrical breaker repair in Fort Collins CO.

Step 1- Buy the appropriate new breaker

There are a number of electrical breakers available in the market and you may get confused by the variety. It is better that you research well about the one required for your power panel at home. For this reason, usually, we can save the packing of breakers and get the same size, voltage, design, and material of new breaker if needed.

Step 2- Follow all the cautions

It is not just essential you have to be sure that the main power supply is shut down before you open up the panel. The experts are confident enough to do this work without turning off the supply but if you are doing it then this is a must. Follow all the essential measures such as standing on a wooden or rubber mat, turning your face away when turning off the power, and standing on a side of the panel not in front of it until you are sure that there are no power in there.

Step 3 - Unscrew the power panel

Use a screwdriver to remove that out covering of your panel. This will expose the damaged breaker. Touch the wires when you are sure that the main supply is off. Using rubber gloves still may not be a bad idea. If you still think you will not be able to do it, stop right there and call the best electrical breaker replacement service in town. It is better than making mistakes.

Step 4 – Get rid of the damaged breakerFind the damaged breaker and take it out of the panel by holding the clasps and get it out from the hinges. Do not touch any other wires or metal bar that was attached with the breaker. Remove the wires that connect it with the system and you are good to go.Step 5 – Install the new deviceThe main target is now to fix the brand new electrical breaker in the panel so that you can continue with the daily tasks. Connect the wires which you just detached, with the new breaker and make sure they are tightened well. Place the new one in the panel on its allocated position and keep it off until you are ready.

In the end, you now have to turn the power on and feel great about finishing this task by yourself. Do not forget to turn off all the smaller breakers so that the sudden turning on of the main breaker does not create problems for appliances. After turning on the main breaker, check that all the connections in the house are working fine

I am Abbot Roots, an expert professional writer who has a keen interest in remodeling the house and has been writing a lot of blogs on home improvement, Lifestyle and Entertainment