What these machine parts do and how they aid in this overall cooling system?

The Compressor

• As mentioned earlier, the aircon service company system takes the heat inside the home and throws it outside.
• The compressor part of an AC is very important because it helps to turn the gas into a liquid form and assist in the cooing process. Compressor plays a major role in the overall cooling system air conditioner service.
• The only basic difference between the cooling system of a refrigerator and AC is that the air conditioner cools a lot bigger space than a refrigerator aircon general service.
• The compressor helps the refrigerant to flow in a continuous cycle.

The air conditioner works using a aircon chemical wash which is otherwise known as refrigerant. aircon chemical overhaul AC converts the gas into liquid and then liquid to gas during the cooling process. When you switch on the AC and set a desired temperature, the gas or the refrigerant arrives at the compressor.

• The refrigerant absorbs the heat inside the house. It enters the compressor via the suction line. The compressor squeezes the gas very tightly together. The tightly packed molecules increase the pressure and the temperature of the gas.
• So, the compressor is responsible for changing the low pressure gas into the high pressure state.
• When the high pressure gas becomes very hot, it enters the condenser. Into the condenser, the hot high pressure gas turns cool and converts again into the liquid form aircon repair company.

The Condenser

After the compressor, the second most important air conditioner part is the condenser. The condenser is a device that helps to condense an element from the gas form to the liquid state. This part is used in the AC for the heat transfer process aircon service.

• Condenser is kind of a heat exchange. Its main job is to release the heat in the gas. In a refrigerator, condenser is used to eliminate the extracted heat from the interior of the unit. For a room ac service singapore, it works the same way.
• Condensers sometimes look like radiators.
• The condenser is made of hollow coils. The hot and high pressure gas travels to the condenser and enters the coil as a part of the cooling process. The condenser then helps the heat to escape, brings the temperature of the gas down and turns it into a liquid form.

The Evaporator

• The evaporator helps in the last step of the increase aircon cooling process. The cold liquid comes from the condenser and again turns into gas here. It happens because of the low pressure of the evaporator.
• During this transition, a fan blows the hot aircon maintenance of the room over the cold coil to bring the temperature of the air down. The fan assists in the contact of the air and coils.
• The fan again blows the aircon general service back to the room. As cold air is generally heavier than hot air, it comes down near the floor. The gas leaves the evaporator and enters the compressor to repeat the whole process again and again.
• The whole process continues to repeat until the overall room temperature reaches the desired limit you set on the thermostat trusted aircon service
• The compressor part of an AC is very important because it helps to turn the gas into a liquid form and assist in the cooing process. Compressor plays a major role in the overall cooling system air conditioner service.
• The only basic difference between the cooling system of a refrigerator and AC is that the air conditioner cools a lot bigger space than a refrigerator aircon general service.
• The compressor helps the refrigerant to flow in a continuous cycle.

The air conditioner works using a aircon chemical wash which is otherwise known as refrigerant. aircon chemical overhaul AC converts the gas into liquid and then liquid to gas during the cooling process. When you switch on the AC and set a desired temperature, the gas or the refrigerant arrives at the compressor.

• The refrigerant absorbs the heat inside the house. It enters the compressor via the suction line. The compressor squeezes the gas very tightly together. The tightly packed molecules increase the pressure and the temperature of the gas.
• So, the compressor is responsible for changing the low pressure gas into the high pressure state.
• When the high pressure gas becomes very hot, it enters the condenser. Into the condenser, the hot high pressure gas turns cool and converts again into the liquid form aircon repair company.

For more details: https://sgaircon.com.sg/

Aircon Installation

Contact US

#05-16 Eldix,

11 Mandai estate,

Singapore-729908

Telephone: +65 94507178

Email: service@sgaircon.com.sg

.

Aircon service company, air conditioner service, aircon repair company, split ac installation,centraliszed ac installation