An Overview Of Hose Clamps and Its Types

@

Hose clamps have risen in demand a lot since the last few years due to their increasing usage, here is an overview of hose clamps and various types of hose clamps that are being widely used nowadays.

What is a Hose Clamp?

A hose clamp is a piece of device which is used to attach a hose to a nipple, barb or any other fitting. It can also be called a hose lock or hose clip. This equipment is used at places where the liquid is constantly moving from one place to another. It is generally used to seal the pipe. They prevent any kind of leakages from the pipes under pressure. The hose clamp manufacturers are very highly sought after as the demand for hose clamps is rising regularly. There is a lot of variety to the hose clips. Spring Clamps, Wire Clamps and Screw Clamps are the major subcategories. Now, it is time to look closely at each one of them.

1. Screw Clamps

Screw clamps usually accommodate either stainless steel or galvanized steel. It is joined to screw on the other end. It is also referred to as worm clamps.

How to create the seal?

Open the screw, separate the steel band, and then place the clamp around the pipe. After that, all you have to do is refasten the clamps.

What are its advantages?

It is uncomplicated, stainless and galvanized steel provide its durability, forms a strong seal and at the end, it can be used for big hoses.

What are its cons?

It leads to asymmetrical pressure and the seal can shrink over time.

2. Spring Clamps

A spring clamp is normally manufactured from spring steel alloy strip. Normally, it is shaped like a ring with projecting ends that bends towards outside. A spring clamp is more complex as the interlocked ends need to be impelled upon each other. They are not manufactured for thick pipes and high-pressure pipes. It is mostly utilized in the car coolant systems.

What are its advantages?

It is cheap and puts good pressure surrounding the joint.

What are its disadvantages?

Not for thick and high pressures pipes.

3. Wire Clamps

They are either U-shaped or resemble a lot to screw clamps. They are relatively stronger as they are made up of heavy steel. Wire clamps of U-shape have nuts fastened to both the ends. And these nuts are designed in a way that they form a round shape.

What are its advantages?

It is not complex to use and its tightness can be adjusted according to your will.

What are its cons?

It gives disproportionate force on the joint.

4. Other Different Ways to Seal Hose Joints

Well, if you are thinking that clamps are the only way to seal joints, then you are wrong. There are other several ways as well. Such as swage fitting, compression fitting, push fit-fitting and the use of a crimp band. But keep in mind that they are not as easy to employ at work as hose clamps suppliers.