MIG Welding Tips For Beginners

Metal Inert Gas or MIG is the welding process which provides a constant shielding gas and electrical power to the consumable solid electrode until it’s melt and weld the materials or joint with its deposits. MIG welding is a common welding practice but it does require specific techniques and, to some extent, experiences to perform it. However, there is always the first time for everything and it includes the welding work. If you’re new to MIG welding, here are some tips for you when using MIG Welders:

Pre-Clean Materials

Cleaning materials before welding is a must in MIG welding and it’s applied to all projects with no exception. It’s very important to rigidly clean and removes any stains or contaminants on the materials which can interfere with the welding process. Stains, rust, paint, oil, grease could disturb or even block the penetration of the welds. They also weaken the structure of the finished results and it could break anytime. That’s pre-cleaning is a crucial part of the MIG welding process.

Check The Earth Clamps

In other hands, MIG welding problems are driven by the earth clamps used while welding. A huge electrical circuit is generated when you’re welding and you should ensure there is no breaks or leaks to get the best performance. The earth clamps determine both safe and efficient welding. The contact points of earth clamp should free from stains or rust which may block the contacts. If it can’t be helped, then it’s suggested to invest quality earth clamps for a more reliable and better welding performance.

Non-Gas MIG Welding Wire

You may consider the non-gas MIG wire like the self-shielding flux core wire. It has a high deposition rate which delivers deep penetration and thick result. It doesn’t need gas shielding deals with contaminant well, so it can generate a clean result. If you’ve found this wire generating too much spatter, use safe anti-spatter products to get rid off after welding excesses.

Quality MIG Welding Wire

There are too many MIG Welding Wire products available in the market. Unfortunately, some of them are not quality products which deliver very poor welding results. Their low prices are very tempting but they could be damaging as well. Instead, invest in quality MIG welding wire which features decent copper coats as well as precise measurements. It would deliver an effective welding process and reliable, consistent results. Quality MIG welding wires are available in competitive prices since more companies producing this product. Investing in the quality wire would improve the overall welding performance and result.

Investing in Quality Tips

Many welding issues like inaccuracy, sticking, or weak welds are mostly driven by contact tip quality. You might want to save the cost with cheap contact tips but it would make the wire unevenly, roughly go through the tips which generate overall erratic welding and waste of wires. At this point, it’s highly suggested to invest in quality tips to get the best welding results. Genuine parts would deliver an even perfect MIG welding results for sure.

Adelaide based writer focused on providing informative articles about a wide range of interesting topics from marketing, accounting, SEO to home improvement.