How to Fix Shower Head Leak

Is your showerhead leaking? How can you solve such a problem? Go to the market and buy another one? No, hold on. Many homeowners usually make this mistake. While it is an immediate reaction, you don’t have to take the same path as well.

The second most common mistake is to employ an artisan when the problem is just a direct interruption.

A shower leak is not a severe problem that can demand the hands of an expert. You can fix this problem on your own and save those few pennies that you will pay that expert. Fixing a leaking showerhead even by a novice like you is a breeze.

Do not try to call an expert before giving it a touch. This is a doable venture and a money saving practice. But you should also understand why a shower head is leaking. The two essential explanations behind it are that the pipe screws are loose thus allowing the passage or some water or that the openings have been clogged, restricting the water flow thus causing the hole.

Fixing the leak on your own

If you have a timeline and are curious to fix it on your own without employing the help of someone else from home, what I tell is that it is doable. It only takes a few minutes and a few devices such as a screwdriver, a wrench, and a washer. These tools can be acquired from any tools store or home improvement shop. At some point, you will also need some silicone oil, tweezers, tape, and a plastic brush ready.

Here are the steps

Steps on how to fix the leaking shower head

Step 1. Remove the leaking shower head.

The first step is to remove the leaking the shower head and then cover it with a soft cloth or rug. This will prevent any potential damage. Take it from the outlet. Add the old washers and O-rings to the new ones you just purchased by gently pulling them. To attach the seal, use a hand strap tape on the cord before reaffixing the shower head.

Step 2. Make it staple

To maintain stability and increase the pivoting motion, apply some silicone oil to the ball. Since you have officially dismantled the entire head, add an extra perk before you screw the head back on.

Step 3. Remove the faceplate

If it's impossible, unscrew the entire region. CLOGS in showerheads are due to debris that is stuck in the middle after some time. To dispose of the clogs, spray the front panel or entire head for 8 hours in undiluted white vinegar. This reduces the debris. You can also apply a plastic brush and wipe out all the deposits that are causing the clogs.

Last note

With these three simple steps, your leaking shower head will never be a bother again. They are simple and doable steps that any homeowner who even doesn’t have any prior skill can follow and escape the need to call for an expert.

To know more about best shower head click here.

Robert is a blogger and writer. He loves to share her experiences with others.