Scaffolding Fittings Offer Safe And Secure Construction Work

Scaffolding is a temporary structure used to provide support to the workers during the construction, repair, and other works. It is made for the buildings and places that cannot be reached with the help of the ladder allowing for an easy movement of materials as well as safety of the workers. This elevated platform is made using various materials like the tubes, ropes, plank boards, and scaffold fittings. Let us look at these equipment in detail below:

Types Of Scaffolding Equipment:

• Tubes – They are one of the most basic of the scaffolding equipment used for making the scaffolding. They are used for the basic structuring by joining the pipes together. Tubes in different dimensions, and thicknesses are used for making the scaffolds;

• Boards- The boards are placed on the tubes to provide a stable and secure platform for the workers to stand and work on. They are important to provide a secure working platform and are joined to the pipes with the help of the scaffolding fittings;

• Fittings- In order to provide strength and stability, the scaffolds are joined together with the help of the fittings. Most commonly, the Fence Fittings Manufacturers offer the Forged or Pressed Scaffolding Fittings. Some of the common types of the fittings used are:
  • Right angle coupler or double coupler- It is one of the most commonly used coupler used to connect pipes at right angles. It comes in a variety of specifications and designs to suit the requirement of the scaffolds. The drop forged fitting offers maximum strength to the load-bearing components.

  • Swivel coupler- It is used to connect two tubes at any angle for the facade, ledger, or bracing of some structural component used for load bearing. The swivel coupler can be made from forged, cast, or pressed steel.

  • Sleeve coupler- It is used for joining two scaffold tubes externally at the ends and a divider located centrally. It can be used in places where the tension joints are required and are useful for ledger and long bracing tubes. each side of the sloeeve coupler is tightened for center fitting.

  • Putlog coupler- This coupler is used to connect two tubes at right angle. It connects the putlog tubes to the ledger tubes as in the conventional fittings. It incorporates two flaps to give a flush top surface to the joining tubes. They are useful for long bracing and ledger tubes.

  • Joint pin coupler – This coupler provides end-to end connection to the two scaffolding tubes. It is inserted in the internally where it grips the walls of the tubes and pipes. It is mostly used for the compression joints.

The scaffold fitting mentioned above are used for the joining and holding of the structure and giving it structural stability and strength. the selection of the equipment should be based on the strength and stress bearing required from the scaffolds. The construction fitting are easily available with Scaffolding Fittings Exporter.

Him Overseas is one of the top leading manufacturer & exporter of construction fittings such as Forged Top Cup Scaffolding, Bottom Cuplock, Ledger Blade Cuplock , and so on.