Why Hurlstone Park Spray Painting Professional Use Sandblasting Technique?

When it comes to striping paint, corrosion, oil and grease from the steel body of a car, Hurlstone Park spray painting professionals use various methods, but some of the most general are sandblasting, soda blasting and dustless sandblasting. Sandblasting utilises sand particles only to rub the surface of a vehicle with little particles propelled at high pressure. Soda blasting uses sodium bicarbonate, otherwise known as baking soda. Dustless sandblasting is similar to sandblasting with the adding up of water and generally a rust inhibitor. However, the sandblasting is the cost-efficient and highly effective technique used for cleaning and maintenance the surfaces of your car.

Steps included in the Sandblasting

Customary wet painting needs a solvent-based, or water-based paint is sprayed on a surface. The sandblast and paint procedure is more intensive and divided into three steps as follows pretreatment, application, and curing.

1. The first step involved in the blasting is to clean the surface part and old coatings, rust and grease are removed through the abrasion. The etching and rubbing are done to the surface so that the paint gets properly attach with it. However, if you ignore this step, paint break off more easily. Sandblasting strips the corrosion off of the car parts. Leaving it exposed and not appropriately completed in the wrong situation will cause rust to form rapidly. The region is permitted to dry in a safe atmosphere before moving to the next step.
2. After pretreatment, a zinc-based primer and the powder are electrically applied by an electrostatic gun. It supports the level of circulation and pace of the application. Furthermore, it also gives double advantage to, Hurlstone Park spray painting experts to prevent over-spraying since excess paint is repelled.
3. Finally, the primer gets heated as well as gel, and then the last coat is applied. The finish is customizable, and it is used the same way as the primer. Again the part gets heated until it gives a new look and excellent finishing.

Advantages of Sandblasting

• From cleaning precision parts to reclaim surfaces, sandblasting is a helpful method to advance the appearance and function of your the vehicle, refinish once-deteriorating surfaces, and increase the lifetime of your car.
• It's the quickest method to remove paint and additional coatings and strip metals to exposed surfaces.
• Scale, rust, old paint and additional surface materials are removed in minutes and thus make metal surfaces free of foreign matter and contagion.
• Manually cleaning the metal surface can be an extended, complicated procedure that needs a great deal of human effort.
• However, using sandblasting for this point can significantly speed up the whole process, and it also requires much less attempt on the machine worker.

While all of the surface oxidation gets removed during the process, leaving the metal exposed and susceptible to the moisture in the air, make sure the product is set aside within a dry atmosphere after being sandblasted. Also, it’s highly recommended by Hurlstone Park spray painting professionals to be careful and avoid getting everything inside your eyes or additional orifices while working with the tiny particles being used.

Welcome to the Camper down collision centre. We have a trusted and reputable experienced smash repair specialist who provides a full range of expert car servicing and repairs.