How to Seal Leaks in Poly carbonate Roofs

Polycarbonate is currently one of the most used options when it comes to roofs because of the fact that you can take advantage of sunlight and at the same time have heat protection and impact resistance. They are lightweight, easy to handle and mold.

WHERE CAN I USE THIS TYPE OF CEILINGS?

Due to all these advantages, it is highly recommended that you use it in environments where you want to have greater luminosity such as terraces, swimming pools, patios or facades. When companies are widely used in shopping centers and buildings.

Polycarbonate sheets have self-adhesive protective sheets included on both sides that have to be removed before installation, it is very important that before placing them you look carefully at the part that has a UV filter it is recognized because it comes with a mark indicating the side so that you do not lose the correct position of it when installing it. You have to make sure that the base structure where they will be placed is stable, level, without imperfections to avoid any accident that could damage them.

MAINTENANCE TIPS.

For its good functionality to last for much longer you must take into account certain tips to keep these sheets in good condition.

• When cleaning them, you only have to do it with soap and water and using sponges or cloths of soft cloth, without using abrasive or chemical products that mistreat the surface in order to prevent it from being altered.
• To maintain the characteristic beauty of these panels, it is recommended that you do cleaning at least every six months, remember, with water only or otherwise with a little soap and dry it immediately with a shirt or suede skin that is highly recommended For these sheets.
• Do not clean them under too intense sun or very high temperatures because the surface can be mistreated. Do not use vapors, chemicals, brushes or brooms that can mistreat the sheet.
• As for storage, you should leave it in a closed place in case they should be left outside I recommend that you cover them with sheets of white polyethylene that is an opaque reflector, a tip is to leave them resting against a half-inclined wall with each other, if the stack is horizontal you have to be careful that the maximum height of the pile does not exceed the meter to avoid any damage.
• In handling you should avoid scratching or rubbing as much as possible.
• If necessary, the sheets can be curved transversely when transported.
• It is very important not to let the sheets carry too much sun before installation to avoid that the protective film she brings (which is removed before placement) adheres to the sheet.
• It is recommended to keep it at least 20 cm apart from the ground.

DROP REPAIR

In the rainy season, one of the biggest inconveniences that exist are the leaks and the worst thing is that they are detected when the rains are already started, we can think that in this type of material to eliminate them is something complicated or expensive but in fact it is very easy, fast and the weather doesn't matter. As we do not all have masonry knowledge today there are specialized products in this type of repairs that are quick to dry and very easy to apply.

One of those products that I am referring to is HIDROPLAST DE PROTEX, a type of cement that its application in cold makes it very useful at the time of a quick repair, is made of asphalt plastic added with special additive minerals for these surfaces that They make the leak even in the rain.

Steps to apply it:

1. Clean the surface to leave it free of dust or any other material.
2. In rainy conditions, it is recommended to remove the excess water that exists before the application of the product.
3. Its application is done with the help of a spatula, spread the product throughout the leak making sure to fill it completely
4. It has a yield of 5 to 7 linear meters per liter.

For the repair of dry leaks, in this case, the

Choose a bright booth for your next show and you have the assurance of increased visibility and a strong visual impact.