HP OfficeJet Pro 9025 Troubleshooting | 123.hp.com/setup

Is your HP OfficeJet Pro 9025 encountering printer connectivity issues? You can use the tools provided by HP support. It is the HP Print and Scan Doctor the tools created by HP to handle printer issues. Look at the steps given below for printer diagnosis.

When there is a printer connectivity problem-

Download HP Print and Scan Doctor. If you have begun the download continue

Run from the location of download on your PC.

When the HP Print and Scan Doctor is active tap 'start' and then select the printer. If the printer is not found in the list click, retry.

If it is a problem with connection go along with the steps in the tool.

The screen will display prompts to power on the printer updates. Press Click.

The screen will again display prompts to change the printer into a default printer. Click Yes.

If the problem is still present try other tips in HP support site 123.hp.com/setup.

When the print is stuck in the queue-

Get the HP Print and Scan Doctor.

Run exe from the location in the PC.

When the HP Print and Scan Doctor is active, press start and select the printer.

If the printer is not on the list power on and retry.

If it is a problem with connectivity follow the steps in the tool

Press 'Fix printing'.

Network scanner connection error

Some potential mistakes that can happen if you cannot scan, computer is not detected, the scanner has not been identified and more. To correct such mistakes, follow the measures below.

Step 1: Check the print and scan problem

If you discover that printing is a problem, you can also inspect the link to your network.

If the mistake is only with scanning, follow the next measures.

Verify and restart the printer for your driver scan settings.

By restarting the system and setup of the printer, it helps to restore the lost scanning link.

Switch off the HP OfficeJet Pro 9025 and remove the power cord straight.

Also ensure that the power socket is not linked via an energy protection device.

When operating, close any program and then switch it off on your computer system.

Click on Printer Name 9025 to search for the files that contain the name for your configuration hp 9025 printer.

Step 2: Check your system link status and 123.hpcom/ojp9025 printer

Find out if the OfficeJet 9025 Printer is attached correctly to the network or not.

Check if the connection is secure and stiff if you are using an Ethernet cable connection.

You need to verify whether the wireless network icon is available on the display.

This hp printer does not support both the frequency bands of 2,4 GHz and 5,0 GHz.

Therefore, you should use the 2.4GHz band to verify router.

Drag the cursor on the network icon on your system and display the name and the status of the link.

Step 3:Run your doctor of printing and scanning.

Step 4:Remove the 123.hpcom/ojp9025 printer driver and install it again.

You can scan and resolve all kinds of problems using the HP Print and Scan Doctor. This will easily assist you in troubleshooting printer issues. Use this diagnostic tool to maintain the condition of your HP OfficeJet Pro 9025.

For any other additional 123.hpcom/ojp9025 setup and HP OfficeJet Pro 9025 troubleshooting issues, you can contact our technical support team number +1-850-761-8950 to get instant help.

Getting perfect guidelines for the 123 hp com setup is a quite difficult. If you have any issues while trying to set up the printer, you can reach out to us at any time. Give a ring @ +1-850-761-8950 to the toll-free number given here.