Easiest Ways to Remove HP Printer Error Code 13.20.00

Easiest Ways to Remove HP Printer Error Code 13.20.00

HP printer error code 13.20.00 occurs due to paper jam issues, defective paper control issues and issues in the input tray. It is a very common issue but you need to remove this error as soon as possible. Because it affects your printing job, therefore you need to eliminate this error from your device. If you have no knowledge about the solutions then don’t need to worry. Just pick up your phone and dial the toll-free number of the experts. The professionals are always with you to solve your problem. They will assist you in solving this error as soon as possible. HP printer repair support team also here to solve your problem. To fix this issue, you can also read this article. Here we discuss how to solve error code 13.20.00. If after applying the mentioned steps your problem persists then contact the experts without any delay.

Troubleshooting Steps to Remove HP Printer Error Code 13.20.00

There are several causes behind this error code. If you want to remove this error as soon as possible so don’t worry. For your help, we bought one of the best solutions in this section. Through the given steps you easily Remove HP printer error code 13.20.00.

Step 1. Check the Paper

To remove this error code, you need to check all the paths to see the stuck piece of paper.

Step 2. Remove paper tray

If the above steps do not work to solve this issue, then try to remove your printer’s paper tray and the toner cartridge to be safe.

Step 3. Verify paper width sensor moving

After that, you are supposed to locate a paper width sensor and should ensure that it is moving freely or not.

Step 4. Check pre-feed sensor flag moving

• If the paper feed assembly has replaced, then check that the pre-feed sensor flag is moving properly.

• Then, go to the top of the page sensor and then verify that the sensor arms move freely there.

• Check that the pre-feed sensor installed properly.

Step 5. Check fuser sensor and jam

After doing this, you need to locate the fused sensor and check the paper jam and carefully look for the possible paper scrap stuck.

Step 6. Remove the DC controller PCA

You need to remove the DC controller PCA. After that, if the error comes frequently then move to the next step.

Step 7. Put the cartridge and paper tray

• Put a piece of cardboard same having the width of a piece of paper.

• Cardboard exiting from the top cavity means you can stop it.

• Now, remove the cardboard from the bottom cavity of the printing device. After that, you have to put the cartridge and paper tray back in the printing device and restart the machine.

If the above steps fail to solve your problem then contact the experts. They will assist you in solving your entire issues regarding the HP printer. The professionals have deep knowledge about this, so they will provide one of the best solutions to remove this error code instantly. To discuss your problem with the experts you can dial HP printer support phone number + (1)-888-846-5560.

Contact HP printer support number+(1)-888-846-5560 and get the various types of printer support.