Roles and Fabric Levels Used to Design Cut Resistant Gloves

If you have to work with objects such as glass or nails you should consider purchasing gloves that comply with the test standard EN 388:1994. Almost all types of puncture resistant gloves undergo this test.

Alternatively, if you must handle fine objects, especially hypodermic needles, you should get gloves tested to comply with the ASTM F288 standard. Ideally, puncture-resistant gloves should protect against abrasion, impact and cut resistance.

Tactical gloves are gloves which provide extra strength to the hands. These Tactical gloves have knuckles in them and are made by using very high-quality material. These gloves not only prevent the hands from injuries but they look very stylish too. A lot of bike riders prefer to wear these gloves while driving their bikes. Tactical gloves, as well as the Search gloves, can be bought from 221B Tactical. These gloves are readily available here on this website and you can order and buy them at very affordable prices.

Roles of Cut Proof Safety Gloves When Dealing with Hazards

Based upon broad classifications, cut proof gloves help industrial workers deal with two major types of cut hazards. These are:

• Cuts from clean and sharp edges, such as knife blades and glass sheets
• Cuts from varieties of abrasive hazards, such as rough-edge metallic sheets, punched or stamped metallic sheets, and rough-edged glass sheets

Selection of Cut Resistant Gloves Per Fabric Level and Type of Hazard

The important question to ask is "How do I know what type of cut resistant glove to buy?" Experts categorize materials used in the design of a cut proof glove depending upon the type of hazard and the fabric level. See below:

Level 1

Level 1 fabric offers protection against cuts considered a nuisance to the wearer, such as those incurred during automotive maintenance and from paper cuts. Level 1 fabrics consist of natural fibers and materials such as leather, latex or cotton.

Level 2

Level 2 fabrics provide protection from low cut hazards prevalent in packaging, construction and masonry work. Level 2 fabrics consist of stronger synthetic fibers such as polyester or nylon.

Level 3

Level 3 fabrics are used within the design of puncture resistant gloves and are comprised of various high-performance materials. These fabrics protect hands from moderate cut and puncture hazards occurring when manipulating light metal stamping or during the handling of light-duty glass.

Level 4

Level 4 fabrics consist mostly of man-made synthetic materials and steel. These fabrics protect against high risk cut hazards occurring during sheet metal handling and other similar applications.

Level 5

Level 5 fabrics consist of heavy weight man-made synthetic materials akin to metal mesh. These fabrics protect against extreme cut hazards such as the handling of glass plates

In conclusion, cut resistant gloves decrease the likelihood of hand injuries to workers that include severe cuts and bruises.

About Author:

Brad Pedell is an author with a deep knowledge regarding Tactical Clothing.His Articles on Puncture resistant gloves and Cut resistant gloves is quite interesting to read.One can know a lot about it by reading the article.

Brad Pedell is an author with a deep knowledge regarding Tactical Clothing.