Why Do You Need A Launch And Recovery System For Your Oceanographic Survey?

You need a launch and recovery system because that is the only way for you to ensure that you can properly deploy all the gear that you are using for your research. Most long surveys use ROVs and CTD arrays that need to be launched with a winch. Plus, you need a system that comes with its own data cable. If you have invested in the right system, you will save a lot of money. This makes it possible for you to manage all the equipment that is used for your journey, and you will feel much better about all the data you have gathered.

How Does The Launch And Recovery System Work?

When you are using a launch and recovery system, it often will launch the ROV, lights, cameras, and CTD arrays you have brought for the trip. Plus, you can launch other accessories that you need for the trip. The winch is controlled with a small remote, and it has enough power to haul all your gear while you are surveying underwater. The winch can pull everything back to the surface, and it is even installed by the rental company when the journey starts.

Do You Need A Data Cable To Go With Your Winch?

You need a data cable to go with your winch so that you can collect information from your sensors and ROVs. You may be using something like an acoustic Doppler current profiler, and you need to get an accurate reading from that machine throughout your trip. Plus, the data cable needs to be a part of the winch assembly so that it will stay attached to the ROV at all times.

Wireless transmissions do not work when you go too far below the water, and that is why you need to use the launch and recovery system to attach the data cable to each device.

What Other Devices Do You Need For Your Survey?

You need an acoustic Doppler current profiler, sonar devices, CTD arrays, and USL sensors. You can collect information with all these items, and you can gather the data on a computer that you rented. This is very important because you may not have a computer that works with all these devices.

You can transfer all the data to a hard drive when you get back to land, and you do not need to worry about losing your data. Plus, you do not need to spend too much money on equipment for your trip.

Can You Get Cameras And Lights For Your Trip?

You can get cameras and lights for your trip that will make it easy for you to see what is going on below to surface. Your ROV can dive up to 6000 meters, and you need cameras, lights, and equipment that works at those depths. This is very important because you need to get a clear picture, and you also need to get the exact power that is required for a specific depth. You can ask the rental company for advice, and they will give you the exact devices that you need for the survey.

One More Thing About Renting Oceanographic Survey Equipment

When you are looking for things like an acoustic Doppler current profiler, launch and recovery system, ROV, and lights, you can work with a company that is near the shore. You can get a rental company that will do everything you need, and they will explain how you can deploy all the things that you need. Plus, you can choose rental contract that you need. You will learn a lot about how you can collect your data, and you can save money.

Allison Smith is a freelance content writer from the USA. She has done Masters in Journalism and Mass Communication from Institute of Management Studies. She is an avid blogger and aspiring novelist.