High efficent coolling tower FRP fans

IT is a heat removal device, it is used to transfer process waste heat to the atmosphere.

All the towers operate in the environment full of steam and water that is why most of the accessories are made of either good quality wood or fiber.

The fans, used in it operate in full of corrosive environments, therefore its performance reduces over a while due to corrosion on the surface. The efficiency of it reduces significantly, which leads to several problems like improper cooling, non-maintenance of water temperature, proper cooling but with higher power consumption.

It is a common mistake that upon reduction in the capacity of the equipment, blade angle is increased to maintain the tower airflow requirement, but increasing the airflow by increasing the blade angle, increase the power in the cube of the airflow i.e.

KW1/KW2= (Q1/Q2) ^3(Increase of 10% of the airflow results in a 35% increase in power consumption)To overcome all these problems We offer the best solution by providing high efficient power saving FRP cooling tower fans. The introduction of fiberglass composite material and ease of processing helped in designing to adopt more efficient profiles with the optimum distribution of blade chord and twist, which are difficult to generate with a metallic material. Owing to this fact hollow bladed FRP fans are being rapidly adopted for various applications as cooling tower, heat exchanger, humidification, etc. With the above all advantages we would like to offer some more specialties in the design:

With our expertise in the axial fan blades design, we use the most efficient aerodynamic profile for the blades designed we accept the challenge to prove power saving not only over metallic fans but also against other FRP cooling tower fans.

Only Our blades have the aerodynamic profile over its full blade length compared to other manufacturers providing conventional cooling tower fan having approximately 30% blank portion in the blade which does not present aerodynamic profile.

3. Our aerodynamic hub is the best solution for the reduction of air turbulences near the neck of the blade and to reduce the mechanical hub dimension as well.

Higher efficiency: In cooling tower application of axial fan, we not only accept the challenge of power-saving against metallic fan (around 20 to 35%) but we are also pleased to take the challenge of providing power saving against other cooling tower FRP fan manufacturers (around 10 to 15%).

Excellent surface finish amongst the entire metallic fan range available in industries.

Excellent corrosion resistance with consistent performance even after a long time of operation. Our cooling tower fans include:

Variable and non-variable pitch axial flow fans

FRP Spinner (aerodynamic hub) for improving the efficiency

Our range from 2 to 44 feet.

Our assemblies are dynamically or statically balance as per ISO 1940, balance quality grade 6.3.

Range of Our fans includes all the applications in industries:

Forced draft.

Induced draft crosses flow.

Induced draft counter flow.

Which include approximate all verity of -

FRP, Timber, and Concrete cooling tower fans.

Note -we are always pleased to accept the challenge of power-saving by replacing the existing cooling tower fans based on POP (performance payment).

Maya Fan Air Engineering A manufacturer of energy-efficient power-saving FRP fans of application like - Cooling tower fan Mine Ventilation Fan Acc Fan Fan and Stack and many more