Miter saw safety He is a fool at one point.

miter saw safety

Title: He is a fool at one point.

There was a man here, his name was Burhan, he was very passionate, mostly working without understanding.

But he never admitted that he was wrong, that everything he did was wrong.

At the end of each task he realizes his mistake, but he does not learn, but makes mistakes again and again.

He would not accept any advice from anyone skilled in the work he was doing. He acted like her.

As a result, everyone called him a fool. Some people jokingly called him a brainist. Almost everyone used to make fun of him.

One day event: This guy named Burhan bought a meter saw for his work, But he didn't know anything about Miter Saw.

If people say there is, Mr. Burhan, don't make a mistake now, listen, you have to know the use of miter saw, do you know that? Of course not.

The person giving this advice said to Mr. Burhan, please know about miter saw safety first.

The person giving this advice said to Mr. Burhan, please know about miter saw safety first.

Mr. Burhan did not say anything in reply to the counselor, did not pay any attention, but he acted as per his previous nature.

He said miter saw safety What is it again? The counselor said, "Well, Mr. Burhan, if you buy, you will understand what miter saw safety is."

The counselor departed, saying, And he said, when you understand what is miter saw safety, you will not be able to cry.

He finally bought the meter saw, He sat down at his work, but he did not know how to use, miter saw safety but very important, there is a possibility of death if you do not know miter saw safety.

The man looked at the work, very hard, did not know the miter saw safety, got hurt a lot, realized he did not know the miter saw safety, he could die like this,

Now he understands the need to know miter saw safety. But after a lot of injuries,

Then he went to the counselor to know the miter saw safety, Please tell me miter saw safety, what?

The counselor said, then you understand, then listen, It is necessary to know miter saw safety.

What safety precautions should you follow when using a meter saw?

Wear protective goggles or goggles or a face mask (including safety goggles or goggles).

If the work is dusty, use a dust extraction system and / or respirator or dust mask.

Wear appropriate hearing protection.

Wear protective footwear if necessary.

Attach the saw firmly to a workbench or other rigid frame and operate at waist height. The saw can be mounted on 13mm (1/2 inch) or more dense pieces of plywood and taken to remote areas. This plywood (and saw) must be fastened to a waist high work surface at the job site with large "C" clamps.

Make sure any adjustments are safe before cutting any cuts. Only adjust when the power is off and the machine is not running.

Place one hand on the trigger switch and hold the handle and use the other hand to hold the stock against the fence.

Keep hands away from the path of the blade.

Keep guards in place and in action.

Remove the key and wrench coordinator.

Use crosscuts or combination blades.

Make sure the blade rotates in the right direction.

Make sure the blade and arbor collars are safe and clean. The regular sides of the collars should be opposite the blades.

Set the blade firm, clean, sharp and accurate so that it cuts freely and easily.

Cut only one work piece at a time

Allow the motor to reach full speed before cutting

Wait for the saw to stop moving before removing the work.

Follow the instructions to lubricate and change the accessories.

Keep the work area clean. Chaotic areas and benches invite events.

Keep the work area well lit.

Reduce the risk of unintentional startups. Make sure the switch is off before plugging in.

Unplug the tools before servicing and when not in use.

Check for damage. Repair or replace damaged parts.

Keep motor air slots clean and free of dust and chips.

Use only specific saws and accessories designed for the job.

He said more about miter saw safety. The man realized his mistake, and said I would never do that again.

I m Nahid frm Bangladesh. I am a professional article Writter. I am providing this article for a guideline about a miter saw. I m also expert on this. I u need any more guideline then u can contract with me...