How to Apply Venetian Plaster

You can create and polish a Venetian Plaster by yourself if you have all the essential tools and a little bit of guidance from the Painting Contractor Toronto.

So here are steps for Creating a Venetian Plaster Finish:Step 1

Items you will need include a 10cm flexible steel trowel, 100 grit, and 400-600 grit sandpaper, deep paint tray, Venetian plaster, and optional Venetian plaster Topcoat.

2nd step

Begin the project by rounding the corners of a flexible steel trowel with the 100 grit sandpaper to reduce edge marks during application.

Step 3

Fill your trowel with Venetian plaster and start at one of the top corners of your wall. Holding the steel trowel at a 15 to 30 degree angle spread a thin layer of Venetian plaster over the surface with long and small random strokes. The original wall surface should be visible in some places.

TIP: Wipe your steel trowel often to prevent dry pieces of Venetian plaster from adversely affecting your pattern.

Step 4

Continue this process until the entire surface of the wall is covered. Let the first coat dry for 4 hours before applying a second coat.

Step 5

Start again at the point of origin (top corner) of your wall and apply a second thin coat of plaster over the first coat. Hold the steel trowel at a 30 60 degree angles and make long and short, layered strokes to achieve an uneven appearance over the first finish.

TIP: Fill in voids and recessed areas while completely covering the original surface. Soften any marks left with a trowel.

Step 6

Continue this process until the entire surface is covered.

TIP: Note: Contact Painting Contractor if you are not professional.

Here are steps for Polish a Venetian Plaster Finish:

You have applied the Venetian plaster on your walls. Now you need to smooth the Venetian plaster finish. Smooth Venetian plaster should look smooth and polished.

Allow the second coat of Venetian plaster to dry for at least 24 hours before smoothing the surface.

However, you must smooth the surface within 7 days of applying plaster.

Step 1

If smoothing the surface, use 400 or 600 grit sandpaper. Rub the surface in a circular motion until you achieve the polished look you desire. For larger areas, you can use an electric sander.

TIP: Pressing harder will smooth the surface faster.

2nd step

Wipe the surface with a slightly damp cloth to remove any plaster dust.

Step 3

After sanding the surface, use the flat side of a clean towel to rub the surface to make it shinier.

Step 4

Repeat the process until the surface is completely smooth.

How to apply a top coat over a Venetian plasterStep 1

If you are applying a topcoat to the surface, use a clean, flexible 10cm or larger steel trowel to apply a thin Venetian plaster Top Coat over the newly prepared Venetian Plaster surface. Holding the trowel at an angle of 30º to 60º, give small, long, overlapping brush strokes. Let it dry for regarding twenty four hours.

TIP: Applying skinny coat of Venetian plaster prime Coat will stop product build up in recessed sections of the surface which will manufacture a milk like look on the coat.

2nd step

Wipe down the steel trowel typically to forestall product buildup.

It's nice to try to to your work by yourself however professionals suggest as a result of there area unit heaps of edges of hiring knowledgeable Painting Contractor.

So why produce a multitude around your house by doing work on your own. After you will rent the most effective Painting Contractor close to you.

You can contact Mas Construction by visiting their website their www.mascons.ca

Mas Construction House Painter in Toronto. We are a skilled and experienced team of Painters in Toronto. We are specialized in Exterior painting, Interior painting, Drywall installation, Venetian plaster, and Popcorn ceiling removal, and many more.