Comparisons Between S-Type And Double Ended Shear Beam Load Cells: Which One Suits Your Requirements

Even though options are a welcome provision, there are times when they cause more dilemmas than solve a problem. This happens to be the case especially when either the variety of options is widespread or the consequent events are heavily dependent on the decision. Given the importance of the choice, it becomes necessary to remain informed regarding all the little details of the matter.

Choosing the apparatus for an industrial plant surely falls under the bracket of such decisions. A load cell is a transducer that is tasked with providing precise measures of weight for the bulk-produced material. As it so happens, load cell suppliers leave no stone unturned to provide their customers with products that make good on every sort of requirement. Hence, giving rise to a plethora of options to choose from.

Different variants of the device make of different working concepts to give out the final result. For example, some load cells work on compression or tension forces while there are alternatives that take torque force as input. This is the easiest of the numerous scrutinization that you must perform to find the one that is a perfect fit for the task at hand. Compression load cells are the most sought-after types since their applications are widespread.

Surprisingly enough, there are several sub-groups to this variant. Without a doubt, this complicates the choice-making process. The following two groups of load cells contribute to the headache of a lot of customers. And that is precisely what this article intends to get rid of.

• Double-ended shear beam load cell
• A double-ended load cell is made exclusively to measure compressive type forces.
• The loads applied on the devices are required to be centrally put, since the application of side loads may compromise the precision offered by it.
• The usability of these load cells may be found in silo scales, weighing frames, vehicle scales, container scales, etc.
• The double-ended shear beam load cell is a two-spring body system.
• The device is calibrated in grams, kilograms, or tons.
• S-type load cell
• In addition to measuring compressive forces, an

S-type load cell comes in handy for the measurement of tensive forces as well.

• The deformation caused by the load is measured at both ends instead of being focused on a single side.
• The usability of the device includes, but isn’t limited to, hybrid scales, crane scales, hanging container scales, etc.
• It sports a single-spring body system that is located in the center bar.
• As opposed to the other types of load cells, this type of load cell isn't just adjusted in weight units.

Making the final decision of buying a load cell based on the aforementioned distinctions, will surely reduce some of the turmoil that you were about to put through. After having decided on the type, the final problem that needs to be sorted out would be the dilemma of where to buy the device from. Pretty much all the load cell manufacturers in India prioritize the quality of the product. Therefore, the only factor that you need to bother yourself with would be the cost-effectiveness of the transducer. Look into it, and treat yourself with the best device possible!

About the Company:

Sensomatic manufacture a wide range of high precision load cells for various Industrial application in India. Our range includes S-type load cell, Shear beam load cell, Double ended load cell, Compression load cell, Stainless steel load cell, Weighbridge load cell and many more.

Sensomatic manufacture a wide range of high precision load cells for various Industrial application in India.