Indicator light

The FILN indicator light is of high quality, the price of the FILN indicator light is good, the FILN has various styles, and the color of the FILN indicator light is superb.

The size of our 120v, that is, the diameter of the nut is 8 mm. It is suitable for instruments with a mounting hole of 8 mm or more.

The material of the is plastic, but we use nylon PA 66 for its top frame, which has good high temperature resistance. The head is also designed with an IP65 waterproof rating, and the also has a certain degree of waterproofs. As long as the whole indicator light is not directly immersed in water, our indicator light can work for about 50,000 hours and the mechanical life is 100,000 times.

The connection method is pin type, which can be easily installed on the instrument. Of course, if you need it, we also have screw feet and wire indicator light for your choice.

The production process of is produced in accordance with ISO9001 production standards, and has also obtained CE and VDE certification. We also provide customized special services. If you have a favorite pattern or a logo you want to add, we can meet this need.

The voltage of the 120v neon indicator light can be 110v, 220v, 380v.

The monochrome has 5 colors in total, red, yellow, blue, green and white. You can also do two colors such as red and blue, red and green, and three-color indicator light such as red, green and blue.

Stable quality and high yield are the goals of our 120v neon indicator light workshop. Of course, we can also do it.

If you have any questions about our, please contact us.

Due to the reason that the knowledge of the correct installation and use of the RCBO is not popular, improper installation of the or incorrect wiring often causes malfunction or refusal to operate and cannot be put into operation normally.

1. The main reason and solution of misoperation

1. Misoperation caused by improper use of : Three-pole switches are used in three-phase four-wire circuits. Since the normal operating current in the neutral line does not pass through the zero-sequence current transformer, as long as the single-phase load is started, The residual current action circuit breaker will operate. Solution: Three-phase four-wire circuit must use three-phase four-wire.

2. Misoperation caused by leakage current and conductor-to-ground capacitive current: The load side of the residual current-operated circuit breaker is laid close to the ground and is long, there is a large capacitive current to the ground, which may cause malfunction. Or the load-side wire has a large leakage current to the ground due to reduced insulation, which may also cause malfunction. Solution: Use a with a slightly larger leakage current specification.

3. Misoperation caused by the grounding of the neutral line on the load side; the grounding of the neutral line on the load side of the will cause normal operating current to flow into the ground through the grounding point, causing the RCBO to malfunction. Solution: Connect the ground wire to the neutral wire on.

Filn is Due to the reason that the knowledge of the correct installation and use of the Rcbo.