Why is Chemtex Retentive Silane based Antimicrobial Coating an ideal choice for Surface Disinfection

To explain antimicrobial coating in simple words, it is a combination of chemical engineering with germ kill technology that creates an invisible layer over the intended application surfaces, inhibiting microbial contamination for a considerable time period. It is less laborious, cost effective and can be applied on all surfaces, preventing microbial contamination.

This positively charged spiked layer pierces down the negatively charged microbial cells on exposure, while remains active on surfaces for a longer period, bringing a more proactive approach to prevent surface transmission of diseases.

Working:

https://youtu.be/R0byA7Yf1IU

Benefits

• Long term protection from surface borne pathogens
• Advanced silane technology
• Easy to apply
• Formulated for places with high human traffic
• Non-toxic, non-corrosive, biodegradable
• Cost-effective
• Does not hamper routine cleaning programs

BioBubble Application

Secondary transmission is through contaminated surfaces or fomites. You are bound to get infected by touching a surface or object if it has virus on it as they get spread only through a medium or a host. Not only you, after that wherever you go, you sit, you eat, the surroundings come at high viral spread risk, without coming to anyone's notice.

Coming close to an infected surface can result in transmission of germs. Hence, it becomes necessary to disinfect all human contact surfaces in your residence, office or close arounds. Hotspots like door knobs, handles, armrests, railings, table tops, switches, lift buttons, keys, staircase, desks, phones, keyboards, glass surfaces, tap, faucets, sinks, etc. should be decontaminated before use. Use of antimicrobial coatings on these surfaces make them germ free and prevent further contamination of the same.

100x Effective than Regular Disinfection

Regular disinfection is a tiresome process, to put it straightforward. Take any 10 disinfectants bottle label, 8 of them in their usage directions would say the process is to be repeated two times, three time or even four times a day.

Whereas in case of antimicrobial coatings, use it once and stay protected for a longer period of time.

Regular disinfection has a temporary effect, keeping surfaces protected until re-contamination. Antimicrobial Coating used as a preventive course of action is a secure way of sanitization approach. This coated surface kills persistent microbes and does not allow germs and viruses to settle, inhibiting further microbial colonization contrary to frequent sanitization programs which is mere a curative approach. Antimicrobial coatings reduce the rate of cross transmission of pathogens and does not get rubbed off easily, instantly killing microbes on contact basis, discarding the need for daily disinfection.

Chemtex Speciality Limited introduces BioBubble that discards the need for daily disinfection and brings in the proactive approach to prevent surface based cross transmission of various diseases. With more than 600 specialty chemicals under the brand, Chemtex thrives to provide the best possible solution to some of the most complicated problems and with introduction of BioBubble, they look to ease the process of disinfection and sanitation.

Benefits of Chemtex BioBubble range of Antimicrobial Coating Products & Services:

• Antimicrobial protection to surfaces for sustainable time period with each application
• 100% organic product, no residual toxicity
• Non-corrosive, Non-leaching, Multipurpose application
• No effects on durability
• USEPA Antimicrobial Science Division Approved Formulation
• Non-Toxic and safe by FDA affiliated laboratory as per OECD 203 Guidelines
• Has been tested as per European Standard EN-13697 for 90 days

Learn More at https://www.chemtexltd.com/biobubble/

The name Chemtex depicts Chemical Technology Experts. The early 1970s saw the foundation of Chemtex. And in the following decades, it expanded with its variety of indigenous chemicals and industries catered.