Scandinavia's best suppliers of polyurethane materials

We know polyurethane

PurPartner (www.purpartner.se)

is one of Scandinavia's leading suppliers of molded products in polyurethane materials. We make sure to stay ahead of competitors by developing new materials with less environmental impact without sacrificing quality.

Why polyurethane?

• Resistant to mechanical wear
• Good load-bearing capacity with very little setting of the original shape.
• Variable from soft and stretchable to hard and form-stable.
• Can withstand temperatures between about -40 ° C and +100 ° C
• Can withstand oils, gasoline, solvents and underwater environments
• Adhesion works excellently on metal, plastic and other materials
• Has a high resistance to mechanical abrasion and is naturally shock and sound damping.

Polyurethane RIM, Baydur.

Our products in Buydur, Rim, have an enormously good finish, at least as good as injection molded products. We are competitive in smaller volumes up to 3000-4000 pcs / year shot weights up to 15-20 kg. Then we are the best choice!

Why RIM, Baydur?

• Much lower tool price than injection molding
• It may comprise composites, such as glass fiber reinforced solid polyurethane
• Combined with steel, or other plastic materials with properties intended for e.g. high strength

under load

• Different thicknesses within the same article
• No settlements that you can get when you injection mold
• Competitive in batches up to 3000 pcs / year
• Withstands temperatures between about -40 ° C and +100 ° C
• Resistant to oils, gasoline, solvents
• You can put in threads in the mould before casting, etc.
• Has a high resistance to impact, elongation
• Hardness 80 shore D
• Densities from 40 – 105 grams / liter
• Product wheights up to 15-20 kg

Contact us; www.purpartner.se

Why polyurethane?

• Resistant to mechanical wear
• Good load-bearing capacity with very little setting of the original shape.
• Variable from soft and stretchable to hard and form-stable.
• Can withstand temperatures between about -40 ° C and +100 ° C
• Can withstand oils, gasoline, solvents and underwater environments
• Adhesion works excellently on metal, plastic and other materials
• Has a high resistance to mechanical abrasion and is naturally shock and sound damping.

Why RIM, Baydur?

• Much lower tool price than injection molding
• It may comprise composites, such as glass fiber reinforced solid polyurethane
• Combined with steel, or other plastic materials with properties intended for e.g. high strength

under load

• Different thicknesses within the same article
• No settlements that you can get when you injection mold
• Competitive in batches up to 3000 pcs / year
• Withstands temperatures between about -40 ° C and +100 ° C
• Resistant to oils, gasoline, solvents
• You can put in threads in the mould before casting, etc.
• Has a high resistance to impact, elongation
• Hardness 80 shore D
• Densities from 40 – 105 grams / liter
• Product wheights up to 15-20 kg

Polyurethane RIM, Baydur.

Our products in Buydur, Rim, have an enormously good finish, at least as good as injection molded products. We are competitive in smaller volumes up to 3000-4000 pcs / year shot weights up to 15-20 kg. Then we are the best choice!

Content writer and Seo expert www.purpartner.se