Reasons Why Your Garage Door Might Not Be Working

Is your garage door causing problems? Are you wondering why it is not working the same way it did yesterday? If so, there might be some problem with your garage door.

Problems with a garage door can be quite frustrating, especially when you have to go out in an emergency. Imagine waiting for your garage door to open while you are already getting late for the office.

The garage doors are subjected to daily wear and tear. This can badly impact their performance, and they might even get stuck. Of course, there could be so many reasons why your garage door might not be working, and we are here to tell its possible reasons.

The Photo-Eye Is Blocked

Photo-eye is a device about 4-6 inches off the ground. It is used to detect any obstruction under the gate, thus stopping it from closing. If you notice that your garage door is opening but not closing, there might be a problem with its photo-eye.

Often this happens because the photo-eye is dusty. It misinterprets the dust as an object and doesn’t get the closing command. It is also possible that the photo-eye has been damaged because of the rain or moisture.

Another reason for this can be misalignment between the two photodiode eyes. This makes them incapable of screening anything between the garage door. They can become misaligned because of prolonged usage or pressure on them. Once you have your photo-eyes cleaned and aligned but still not working, it is time to call storage shed and garage professionals such as Stahl Storage Garage Builders.

Your Transmitter Batteries Are Dead

Remote batteries can be problematic. They last for about two years. If you direct your remote towards the garage door and it doesn’t open, check your remote batteries before calling for help.

Also, you can check your wall-mounted control panel and see if that works. If it is working, there is a problem with your remote battery.

Your Garage Door’s Alignment

Sometimes, your garage door's problem, of not opening or closing, is because of its alignment. Your garage door will not function smoothly if the rollers and rails are not in alignment with each other. It may also slow down a little when it passes through the point of misalignment.

For this, you can set it back by first loosening its screws. Then, set the track to its proper position and tighten the screws back. Use a level to ensure that they are in alignment with each other. If this doesn’t work, call a professional to help you.

Your Garage Door Torsion Springs Are Broken

Torsion springs are responsible for moving the garage door up and down. If there is a problem with them, your garage door won’t function well. You can hear a loud noise when those torsion springs break.

There are one or two torsion springs on a gate. If one of them breaks, the other one will find it hard to lift the door or may not lift it at all. If this happens, call a professional to come and install a new torsion spring. You can’t do it on your own.

It Is Winter Season

Sometimes, the garage door doesn’t function in the winter season. It gets stuck, and even after adjusting the sensitivity of the motor, it doesn’t work. The rollers become stiff, and the door can’t slide over. Lubricating the rollers can help to run smoothly.

Your Door’s Sensitivity Is Incorrect

This happens mostly to the older gates. If the sensitivity settings are out of order, your door will not open. Read the limit or ask your portable garage builders/makers to adjust accordingly.

This article discusses ocean freight rates and how it can affect your freight.