Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Can You Install Large Tiles Diagonally?

Author: Elizabeth Barton
by Elizabeth Barton
Posted: Apr 03, 2021

You will find it difficult to install large tiles diagonally rather than straight across the wall. This is because it is much tedious as there will be more cutting involved. Here, you can get wall tiles cheap UK the best designs for your diagonal setup.

In this article, we have demonstrated a super simple method to install your tiles diagonally. This method can be used to create a border around a room with large diagonal tiles or a backsplash with small mosaic tiles in a pattern.

Cut Partial Tiles

Large tile backsplashes can be beautiful — but be warned! They’re remarkably tricky to cut. Seriously, some jobs require a mason’s advice just for the cuts. The solution is to cut partial tiles to create 2 geometric diagonal shapes, then snap the shapes together to create the full pattern. Make a score mark in the center of each tile towards one corner, then snap along the scoreline.

Mixing the Thin-Set

Setting tiles can be extremely difficult if you don’t know how to do it properly. The first step is to prepare the wall, and there are two options for installing large tiles: thin-set mortar and thin-set adhesive It is better to use thin-set adhesive, and it just takes 30 minutes to an hour to settle. A professional installer can create the setting bed in under three minutes.

Grouting the Tiles

Grouting can be tricky. The consistency of the thin-set is the key — too runny, and it will spill, too dry, and it will be difficult to smooth out. An easy way to get diagonal lines is to create a grid on your floor where you place each tile so they are in shape as you want them. You can use cutting-edge electric-powered trowel technology for a wide 90° spread with minimum effort. Just slide it under your tiles and the job did!

Let them Cure

Not all tilesets are made the same. Some may take longer to cure than others do. After you've laid the tile, the last thing you want to do is walk on it. Not only is that extremely risky if the tiles are wet, but you could also be damaging your new tiles’ grout lines.

The best way to let tiles dry completely is to simply let them be. Do not use a broom on new grout lines; once it is fully cured, scrub the grout with an abrasive sponge and some water.

Read also: 5 Creative Ways to Decorate the Small Bathrooms

What to Do After Installation?

The last step — cleaning the tiles — is the easiest and most enjoyable.

Simply use the utility knife to remove the excess grout and then wipe down the joints. Some people consider this the most satisfying part of the process; after all, you see a clean, professional-looking installation. You can also use a hammer and chisel and break off the excess tile pieces and excess grout. Take the angle grinder and use the grinding disc to smooth everything out. Make sure you get at the corners. Wear safety goggles when grinding. Wipe clean with a damp cloth and enjoy.

About the Author

Elizabeth Barton is a Material analyst who keeps record and manage inventory. For more info: https://yourtiles.com/

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Elizabeth Barton

Elizabeth Barton

Member since: Apr 04, 2019
Published articles: 11

Related Articles