How to Extend the Lifespan of Your LED Display?

In this article, you will learn how to maximize the usage of your LED display by extending its lifespan. Here are a few ways in which you can do it:

• Avoid places that are too wet or sunny

Too much sunlight or wet regions may affect the working of the LED display panels. We understand that the prime location for outdoor advertising would always be very different from the ideal indoor safe environments, within which the LED display performs best. Most LED specialists also recommend that LED displays should be put up around places with protective overhead protection so that the display does not establish direct contact with the outdoor climates.

Therefore, use outdoor LED screens that come in handy with proper rain and sun protection while using them outdoors. You also need to make sure to use LED display panels that are made for outdoor use. Or else add proportion protection to the screens to prevent damage from the rains or the sun. If the LED screen is not equipped to handle outdoor climatic conditions, then it would get damaged or lose its potential and longevity.

• Sunlight should not touch the LED screen

While installing an outdoor LED screen, you need to plan the placement and location of the screen so that it is not in the direct line of the sunrays. Direct sunlight carries heat, which could greatly impact the performance as well as the longevity of the LED screen. Moreover, you would be forced to regulate the brightness and the contrast as per the rays of the sun to provide clear visibility to the audience.

If you are doing outdoor events then you could opt for digital signage Brisbane that can handle and absorb the rays and the heat of the sun. In general, the visual settings of the LED screens are designed to provide the best visibility to the audience. Direct rays of the sunlight may force you to adjust and increase these settings to provide better visibility. This could increase the energy consumption of the LED display, and over a while. This could also impact the lifespan of the LED display.

• Use a voltage regulator and surge suppressor

Many LED screen users mistake both the components as the same. But in fact, the voltage regulator and surge processor are two completely separate elements altogether. The surge processor is a device that is designed to counter the short surges in the voltage, which are equivalent to the network cycle. All these elements could be added along with other protections like the filtered for the electromagnetic interferences and the electrical noise. If the timeframe of the surge is long or repeats frequently, then there is a possibility of a damaged suppressor that has stopped working. Therefore, it is not a suitable voltage regulating solution for digital signage Brisbane.

On the other hand, voltage regulators, counter the variations in the voltage in a timeframe of one or more than one network cycle. I.e. more than 16.6 milliseconds. This will help you achieve good voltage with proper stability and without any kind of fluctuations. Even if there is any decrease or increase in the voltage in the grid, the voltage regulator would be able to provide a stable voltage to the LED display and prevent the LED screen from getting damaged due to the sudden changes in the voltage.

Therefore, the voltage regulator and the surge suppressor complement each other very well when necessary and protect your device from the harmful effects of the voltage and current fluctuations.

• Place the LED screen on a flat surface

One of the main tips to increase the longevity and the lifespan of the LED screen hire Brisbane is to always place the display over a flat surface. You could either mount the display on a stand or table or keep it on the ground but make sure that the surface is dry and flat. In essence, the LED display should be mounted on a surface that is not tilted or resistant. The tilted surface tends to disorient the components of the screen, which over the long term, can affect the technical abilities of the display.

Moreover, the problem of the surface happens with the outdoor LED display. The outdoor place is not always flat or plain, making it difficult to place LED displays properly. You cannot always make the ground flat or get a plain surface. Therefore, you need to first make a stable and flat stand and then mount the outdoor LED display over it. This would not just keep the LED display stable but would also allow far away viewers to watch the screen clearly without any obstruction.

LED displays are a great medium to advertise, engage and entertain audiences. Therefore, you need to keep them and maintain them properly to ensure they last longer.

If you want to know more about a LED screen hire Brisbane, you must visit Impact LED Screens today.

It is important to understand the importance and benefits of hiring professional packers and movers services. Visit a href = "https://trukker.com" Trukker to know more.