Think About Calling Furnace Repair Experts? Check These Items

As the winter season is around the corner, you often rely on the furnace to ensure the space's warmth. Imagine how you feel if the furnace is not working properly. It does not provide enough heat and makes you shivering in the cool climate.

Even though it is recommended to have annual maintenance on any furnace over 3-5years of age, it is often prone to repair and replacement. Hiring the furnace repair Calgary Company is the best solution to sort out all the problems in the furnace. Before calling the heating company, it is necessary to check certain things.

Items to check beforehand

• Power

Your furnace often relies on the electricity to operate especially if you use the natural gas furnace. As soon as you find an issue in the furnace, you need to check whether it sets to ON position. Make sure that there is enough power supply to the furnace to work properly.

In addition, you have to check the circuit breaker to make sure it is set to the ON position as well as in good working condition. Even after resetting the circuit breaker the furnace switches off again, do not do anything and call the technician quickly.

• Pilot light

The gas furnace usually comes along with the pilot light. It is located behind the small door or plate near the furnace’s base. This light should be lit all the time to render the ignition source for your heating device. If it does not work, your furnace fails to operate adequately.

Whenever the pilot light is out, try lighting it with the help of the long fireplace match or the grill ignitor. Call the heating professional without any hesitation if you are unable to lit the light or have some concern to light it.

• Blower motor

Another important item you need to check before calling the experts is the blower motor. Do you not know how to look up the working of the blower motor? Stand near your furnace and listen for the start of the blower motor when you switch on the device. If the motor is working, then you feel warm air coming through the vents.

Do you hear the furnace ignite? However, do you not hear the sound of the blowing motor? Are you not feeling any warm air from the vent? These signs are showcasing the time to call the furnace repair experts. They have the necessary tools and equipment to check the condition of the blowing motor and provide the best solution instantly.

• Air intake vent

In many cases, the furnace works properly but you do not feel the warmth inside your home. It is because of the blocked air intake vent. As there is a disturbance in getting the fresh air into the furnace, it does not work appropriately. So, before speaking with experts to avail furnace repair Calgary Service, check whether the air intake pipe has any block.

The air intake pipe is often located outside of your space. You have to inspect it thoroughly and make sure that it does not have any block by debris and other items. If you find any debris and leaves, remove them instantly and check the furnace again. If the problem persists, feel free to call the experts.

Besides, you need to check the thermostat and filter of the furnace. It should be in good condition to make the furnace work properly for a long time. Do not think that these are DIY repair services. It is all the basic steps to follow before hiring the experts to find the potential cause of the problem.

Summary

Do you feel bad as your furnace is not working? Call the furnace repair Calgary professional right now. Before that, ensure you have checked certain important items listed here.

Aaa Heating and Plumbing offers Emergency Furnace Repair Services and full solution of Heating and Cooling for your home & office in Calgary.