The Best 19-inch Rack Mount Chassis for Your Expensive Equipment

Server racks are highly essential for any IT organization as they protect the IT systems and provide safe access to electronic equipment. There are many different types of products available in the market, with different dimensions and features to suit different requirements. But the 19-inch rack is the most widely used as a standard enclosure to mount electronic equipment.

What is a 19-inch server rack?

The 19" server rack is the standard rack size used to mount different types of electronic equipment, especially servers. The 19" rack has a width of 19 inches, including the protruding ears used to fasten the rack to the rack frame. It is widely used for servers, networking hardware, scientific equipment, and telecommunications electronics. The mounting system is quite simple; you can just fasten the rack to the frame with screws, and it will fit most of the electronic hardware used in IT organizations.

Why exactly 19 inches?

The Electronics Industries Alliance standardized the measurement as it suits most electronic equipment. Most of the equipment, especially the servers, have a width of 19-inches, so the rack size suits perfectly. The size was also chosen as a standard to maintain consistency and seamless handling of technological devices globally.

What is a 19" rack mount chassis?

The rack-mount chassis is the box that helps you house your equipment on the rack. The rack-mount chassis can be fastened on the server rack, and it will hold the equipment in place securely. There are several different types of rack-mount chassis available in the 19" category. Manufacturers produce different types of 19" rack-mounts to suit different requirements, so there are a lot of options available for you.

Benefits Of Using 19-inch Server Racks

Here are some of the key benefits of using top-quality server racks for your electronic equipment.

Organized Server Rooms: Using the best racks for your electronics allows you to keep every piece of equipment organized and easily accessible. Better Performance: Server racks have special cooling features that prevent overheating by transferring the heat to the sides. Therefore, with server racks, your server will not only perform at its best, but its lifespan will also get boosted.

Better Accessibility: Server racks allow you to organize your server room for easier accessibility, allowing your technicians to access the servers with ease. This will directly result in quick maintenance and lower maintenance costs.

Security: Modern servers have unique locking systems. Therefore, your servers, and the information stored in them, will always be secure from any unauthorized access.

Durability: If you purchase from reliable and professional suppliers, you will get top-quality racks that have a long lifespan. So once you install them, you will not have to replace or repair them for a long time.

Cost-effectiveness: Server racks offer many benefits, but are not expensive at all. Especially if you purchase them from experienced service providers, you can get the required number of racks and chassis at highly cost-effective rates.

Which is the best 19" rack?

This depends on what type of equipment you are going to mount to the rack. Based on the equipment’s features, heating rate, and handling complexities, you need to choose the right product. To make things easier for you, we have researched and found some of the best products available for you in Australia. Here are a few of the best models that we'd like to recommend.

Takachi MSR Rack Mount Chassis

The Takachi MSR Rack is a sleek rack-mount chassis available in 2U, 3U, 4U, and 5U heights and depths from 230mm to 450mm. The product is available in 16 sizes and 3 colours, and the screwless front panel gives it a very clean look. You can also modify the front and rear panels according to your needs. Overall, this is a good product in terms of aesthetics and performance.

Takachi HYR Rackmount Heatsink Enclosure

The Takachi HYR is a top-class chassis available in 2 sizes and 231mm depth. It also has a unique heat-finned construction that pushes the heat to the sides, keeping the enclosed equipment cool at all times. The Takachi HYR Rackmount Heatsink Enclosure also comes in two colour options.

Takachi ER Series Rack Mount Chassis

The Takachi ER series offers you 35 size options in two colours. It looks highly aesthetic and classy upon installation, owing to its flat front panel and concealed fastening screws. The product is highly durable and perfect for large scale requirements.

Takachi ER Series Rack Mount Chassis

The Takachi ER series offers you 35 size options in two colours. It looks highly aesthetic and classy upon installation, owing to its flat front panel and concealed fastening screws. The product is highly durable and perfect for large scale requirements.

Conclusion

And these are the four products that we'd like to recommend to you. All the models are highly durable, classy, and they offer superior performance and safety for your valuable equipment. So now you don't have to search the internet and spend hours. Just get one of these, and you're all set.

ERNTEC is a 100% Australian owned business. We have longstanding clients in the electrical and electronic industries and continue to grow capabilities to meet the needs of the changing manufacturing sector. We provide enclosures in various sizes.