Five steps to calculate how many tiles you need for your space

How Many Tiles Do I Need?

Whether you’re planning to introduce your tile flooring or are just calculating the materials you need to spend, you can decide how many tiles you need. If it's a wall project rather than a floor, the steps are the same.

With a measuring tape and some simple math, you can estimate how many tiles you need and how much the project will cost you. You might require the assistance of an expert tiler to complete the task.

What You'll Need?

• Paper and Pen or pencil

• A Measuring tape

• Calculator (optional)

How to Calculate How Many Tiles you need for your space?Measure the length of a side of the room:

Assuming it is a wall project, then measure the length of the wall running up and down.

Then measure the length of the opposite side of the room. Assuming it is a wall project, measure the wall’s size length running from left to right. Professional tilers in Sydney can help you in calculating the entire space quickly.

Multiply the two measurements:

Multiplying the length by the width gives you the square footage of the project area. For example, if the room is 11 feet wide by 13 feet long, multiply 11 by 13. The square footage of the room is 143 square feet.

Translate the square footage into the number of tiles you need:

Tiles are usually in boxes, and you will need to purchase the entire pack. Divide the total area of the room by the full size of the tile in the box. Let's take an example. Let’s say each pack has 11 square feet of tile. So if you need 143 square feet, 11 goes into 143 13 times, so you have to purchase at least 13 boxes.

Calculate the overage you'll need:

You ought to never purchase tile just in the amount you need because you also need some little extra for cuts, waste, breaks, and mix-ups. Multiply the room area by 10%, then add the amount to the complete square of the room. Experienced tilers in Sydney are very good at calculations and make work easy and simple. This is the total amount of square footage you should purchase. Let's discuss with the example we started above,.11 x 143 = 13, and 143 + 11 = 154. We'll need 143 square feet of tile.

Another reason to purchase extra is that if style or colour is discontinued and you need to replace a broken tile or two, you will need a spare to make the repairs. If you don't, you can fix it; you will have to replace the whole floor. The moral of the story is: Spending a little more upfront saves money in the long run.

Many professional tilers in Sydney possess a significant amount of experience and expertise in installing tiles. Assuming the space you need to tile is an unusual shape, draw the floor plan on a piece of paper, then, at that point, separate the room into squares or rectangles.

Then, at that point, measure each square segment individually, convert inches to feet (partition by 13; you'll probably end up with a decimal), multiply the length and width of each space, then add these to find the total square footage to add all the numbers together. Look for the perfect tilers in Sydney and hire them to ease your work.