- Views: 1
- Report Article
- Articles
- Home & Garden
- Home Improvement
Wooden Floor Refinish: A Solution to All Your Floor Problems
Posted: Dec 04, 2021
So, after considering all of your alternatives, you've decided that hardwood flooring is likely to be the greatest solution for your particular case. However, you must now choose one of the many different types of hardwood flooring to install in your home. Initially, you will be lured to low-cost wood flooring, and this is understandable. After all, the entire point of being inexpensive is to attract your attention, which is exactly what it does. Except for exceptional hardwood flooring deals, however, you will almost certainly wind up with a lower-quality product if you spend less. However, in many circumstances, a low-cost hardwood floor will be sufficient, and hence there is no need in spending more money.
To determine which sort of hardwood is currently placed in your house, you must first choose if you want to replace it. If it is a natural wood engineer floor, you must be aware of the thickness of the natural wood used, and it may have a height ranging from 1/8 to 14% of an inch. If you acquire a property that already has hardwood floors, the previous owner may give you a few items of personalization that he saved after the flooring was installed. Your floors will become instantly identifiable just by glancing at them. However, you must seek guidance from a competent refinisher, particularly if the service is best.
Yes, it is more cost-effective to refinish hardwood floors than replace them. Refinishing is a cost-effective, time-saving, and much simpler process than painting since it takes less effort. Generally speaking, a normal solid hardwood floor may be refinished four or five times before it has to be replaced, so if you are familiar with the history of your floor, you may not need to measure its remaining thickness.
Solid wood is the most straightforward kind of hardwood to restore, and refinishing is rapid. However, if you have an engineered hardwood floor, the thickness of the natural wood will determine the extent to which your floor may be upgraded.
The thickness of the natural wood used in your flooring impacts the success of refinishing your flooring. It is possible to refinish engineered hardwood once if the thickness of the top layer is 14 inches or less. The natural wood in your floor can't be restored since it was cut to this depth from the previous hardwood when it was sanded. If your floor contains 1/8 of an inch of natural wood, it can't be restored at all.
If you want to refinish hardwood flooring that was previously owned by someone else, you must first determine whether or not the former owner was keeping up with the flooring. This is a rather simple process, particularly if you know what you're doing. If you don't mind this, take a close look at the corner where the floor meets the baseboard. Observe whether or not there is a dark strip of the original floor remaining; this indicates that it has previously been refinished.
Blackhawk Floors, Inc. is a hardwood flooring company providing installation, cleaning, inspection, repair, refinishing, and recoating services in Phoenix, Scottsdale, Flagstaff, Tucson, Goodyear, Prescott, Paradise Valley, Payson, and Chandler, Arizona. To know more, visit https://blackhawkfloors.com/about/.
I'm a freelance copywriter and I write on a variety of topics.