Tree debarker

https://charcoalplant.com/wood-peeling-machine/

Wood peeling machine is a necessary equipment for some wood recycling industries. It can peel the skin automatically and efficiently, achieving 95% peeling rate. The log debarker machine produced by Shuliy Machinery manufacturer includes vertical log debarker machine, trough log debarker machine and horizontal peeling machine. The following are the first two types of wood peeling machines. Welcome to check, if you are interested in our equipment, please contact us in time, we will provide you with competitive prices.

Raw materials for vertical wood peeling machine

The vertical wood peeling machine can process eucalyptus, fruit trees, pine, locust wood, beech, acacia and other log materials. The wood it handles should not be too curved, preferably straight, so as to achieve a peeling rate of more than 90%.

Structure of vertical wood peeling machine

It is a wood peeling machine with a simple structure, which is mainly composed of a pressing roller, a cutter head and a frame. There are a total of 8 pressure rollers, 4 pressure rollers each at the feed port and the discharge port. The blades are fan-shaped, narrow at the bottom and wide at the top, and 4 or 6 blades can be installed on the cutter head. The number of installed tools can be adjusted appropriately.

Working principle of vertical log debarker

The eucalyptus or pine wood is fed into the feed port manually or by a conveyor belt, and the press roller at the feed port rotates to wind the wood into the machine. The cutter head uses the retractable principle to peel the wood of different diameters. The peeled wood is sent out smoothly by the pressure roller at the discharge port. The pressure rollers at the front and rear of the machine have slow-down springs that can lift and drop the wood.

Features of vertical wood peeling machine

1. It can handle wood with a large diameter (within 35cm).
2. Its processing speed is fast, 10m/min.
3. It can peel the skin cleanly.
4. It has a compact structure and a small footprint.

Structure of trough wood peeling machine

The trough debarking machine consists of five parts: debarking roller, feed inlet, debarking outlet, wood outlet and power transmission device. It adopts roller type peeling, simple and strong structure, strong rigidity, low failure rate and long service life.

Working principle of trough log debarker

The trough peeling machine utilizes the force generated by the rotor with stepped peeling teeth to make the wood section circulate in the trough. The wood in the trough jumps irregularly. Therefore, the long-term friction and impact between the wood section and the teeth, the wood section and the wood section, the wood section and the silo trough cause the bark and trunk to be quickly decomposed and peeled, so as to achieve peeling.

Https://woodmachine.org/ https://charcoalplant.com/ Pls contact us Whatsapp/Tel: +86 17319793602