How to Install a Touchless Tap the Right Way

Finding the ideal touchless tap in a market crowded with the same product from multiple firms with varied characteristics that meets your needs is a difficult process in and of itself. The installation of a touchless tap, on the other hand, is not difficult. For those who are unfamiliar with what a touchless tap is and how it works, allow me to explain.

A touchless tap is yet another technological marvel. You don't have to worry about touching the tap with a touchless tap because it starts the water flow by simply placing your hands beneath the faucet, and vice versa. A motion sensor is also being fitted in a touchless tap, which detects movement and starts the water flow when hands are close to the tap.

Touchless taps are in high demand as the number of covid-19 instances rises. They have been proven to be far safer than any other type of tap. With a no-touch faucet direct bathroom sink and faucet direct kitchen sink, the spread of germs and bacteria is considerably prevented. Many people are hesitant to install sensor faucets because they assume it will be difficult; nevertheless, this is not the case. All you need is a trustworthy source of water.

Installation of a Sensor Faucet in the Kitchen/Bathroom

1. Turn off the water supply

The very first thing you need to do is to identify & turn off the water valve. With that, the next step is to run all of the hot and cold taps to drain any remaining water from the system. This assures a dry surface and eliminates the possibility of large spills during installation.

1. Remove the tap you're using now

To access the nut that secures your present basin mixer, you'll need to bend the basin a little. After that, carefully remove it from the basin and unhook it from your home's piping. This is a complex process that may require patience. Any form of rush should be avoided at all costs.

1. Installation of touchless tap

To do so, insert the new Sensor Faucet, as well as the inlet pipe and sensor cable, into the holes drilled on your basin. Then you must descend once more beneath the surface. You must connect the inlet pipe to the relevant inlet port on the controller box of your tap. The identical procedure must be followed with the exit pipe of your water supply.

1. Wire the sensor

From the tap to the controller box, the sensor cable must be connected. After that, open the battery box and place the right batteries inside. AA batteries are used in the majority of sensor faucets, and they provide great power backup.

1. Test & tidy

After you've completed all of the battery repairs and wiring, you'll need to test the tap. To do so, turn on the water at the mains and wave your hand in front of the infrared sensor to turn on the tap. That's all there is to it! For a touchless experience, you have the tap installed. Secure the controller box even more by tying the tangled cables to the wall beneath the sink.

Nowadays, with the rise in new bath technology, a sudden rise in bath accessories has been seen. Bathroom Accessories make your bathroom seem more stylish and modern.