Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

A Comprehensive Guide on Wall Panelling Ideas

Author: Jenny Clarke
by Jenny Clarke
Posted: Mar 07, 2022
wall panelling Wall Panelling Ideas

Wall panelling comes in a variety of shapes and sizes, and it may be used in virtually any space. For every area in the house, from bedrooms to bathrooms to living rooms to kitchens, these are the wall panelling ideas you'll want to check out if you have a wall you want to cover, a material you want to cover it with, and an afternoon to spare.

1. Extend your Wall Panelling along the Ceiling!

What do you think of this for a bedroom that makes a statement? A pleasant canopy-style feature was created for a homeowner's bedroom by attaching rustic boards of wood to the wall behind her bed and then continuing the panels onto and along the ceiling for an overall effect of continuity.

In a space with no architectural characteristics, as well as for a bed without a headboard, this adventurous method might be appropriate. If you plan to use heavier wood panels, such as scaffolding boards, make sure to contact with a professional about how to properly connect them to the ceiling above the mattress.

2. Use Wall Panelling to Frame Artwork

Adding wooden moulding to your walls will provide the appearance of panelling, and it is a simple and quick project to complete. Simply draw rectangles at regular intervals down the length of your wall and then cut pieces of moulding to attach to the forms you have formed.

Make sure your moulding is cut at a 45-degree angle so that the corners fit together smoothly, and that it is painted the same colour as your wall to complete the look. You may use one of the rectangles to hang a canvas or a piece of artwork in the centre of it, and it will act as a frame for the piece of artwork.

3. Go Back to Black

In addition to being a beautiful accent to any decor, charcoal black is a colour that is both dramatic and elegant, complementing all styling trends from minimalist scandi to boho chic. The many tones and textures found in the wood slats offer a layer of complexity and depth to the room, making it simple to incorporate design approaches that interior designers are known for employing frequently.

In addition, this product may be used in conjunction with any colour or material palette in any room - it is really adaptable!

4. Layer Panels in a Bedroom

When choosing a wood panelling backdrop for your bedroom, don't forget that you may also use a wood panel headboard to complete the look. While the wall panels in this room are thin pieces of wood joined in a vertical structure and painted a deep, navy blue, the headboard is made out of a pattern of panels organized in a herringbone pattern and left untreated for a more natural appearance.

In this modern-country bedroom, the two patterns that are placed on top of each other provide intrigue and depth.

MDFCut to Size

Mid-density fiberboard (MDF) is an engineered wood product that has acquired a great deal of popularity over the past few decades. It resembles plywood in certain ways, although it is far denser than plywood. Extreme pressure and high temperatures are used to combine wood fibres with a wax and resin binder, resulting in MDF being created.

Because MDF is extremely dense, it is vital to be familiar with the best equipment and procedures to use when cutting it to the desired size. Let's get started and learn more about how MDF cut to size is done for your project.

Safety First

It is critical that you take basic steps to guarantee your own safety while cutting MDF.Keep in mind that, due to the density of MDF, you may have some difficulties cutting it if you do not use the appropriate equipment. Furthermore, because to the high amounts of dust created when cutting MDF, it is necessary to wear protective clothing.

It is preferable to wear a long-sleeved shirt while working to decrease the likelihood of scratching yourself against the edges of the MDF or the saw blade. However, be certain that the sleeves are not too loose, as you do not want to run the danger of them becoming entangled in the saw blade while it is cutting. It is strongly advised that you use a dust mask and safety eyewear while working. It is certain that a large amount of dust particles would be emitted into the air while cutting MDF.

Unless you're wearing a mask and goggles, they can easily get into your eyes and cause you to inhale them. To ensure that the cutting process goes well, it's best to work in a broad, open space. If you don't have access to a garage, doing this outside may be your best alternative. Otherwise, make sure to open any windows and doors that may be closed to prevent excessive dust from building up. Protect everything that is close to the working area so that it is not exposed to the dust.

Straight Cuts in MDF

Straight cuts can be achieved by employing any of the instruments and procedures listed below.

  • While electric equipment and most hand-held cutting tools, such as the ones listed below, are capable of cutting through MDF boards, the most essential thing to remember is that the blades must be carbide-tipped in order to be effective.
  • Because MDF has a high glue concentration, a dull blade will not produce crisp edges while cutting it.
Circular Saw

Making straight cuts in MDF using a circular saw is one of the most popular methods of cutting the material.

  • It is recommended that you use a circular saw with a cutting speed of approximately 3,000 metres per second.
  • It is advised that you use a blade with at least 60 teeth and that is approximately 14 inches broad.
  • If at all feasible, the blade's tip should be made of carbide.
  • Position the circular saw so that the bottom of the saw blade is flush with the side of the MDF board on which it is being cut.
  • Adjust the depth adjuster on the lever or saw and slide the blade till the tip of the blade is just below the MDF board's surface.
  • It's optimal if the blade's tip is between 1/8 to 14% of an inch below the surface of the MDF board in order for it to cut properly. Then, retighten the lever until it is snug.
  • The MDF board should be placed on a big working table or on a saw horse for maximum results.
About the Author

Jenny Clarke is a professional writer, blogger who writes for a variety of online publications. She loves writing blogs and promoting websites related to education, beauty, fashion, travel, health and technology sectors.

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Jenny Clarke

Jenny Clarke

Member since: Aug 22, 2019
Published articles: 29

Related Articles