Which Metal Finishing Type is needed to add Value to Your Product?

Most of the tech, medical, jewelry, and other manufacturing industries do metal finishing to enhance the qualities of the surface of the metal. This article will help you decide which metal finishing type is required to add value & quality to your product.

Metal Finishing is a physical, chemical, or mechanical process that is used to apply or add some metal coating or other treatment on the metal surfaces, and we refer to that part as a substrate. Aerospace, electronics, jewelry, medical, consumer products, hardware, and many other industries use different metal finishing techniques according to their business requirements to improve the look and quality of the metallic products.

Many metal finishing companies comprise a broad range of finishing processes such as electrolytic plating, electroless plating, chemical and electrochemical conversion to protect, increase durability, improve the appearance, and enhance the electrical properties of the products.

Some other advantages of metal finishing are as follow:

Increased durabilityImproved decorative appealEnhanced electrical conductivityElectrical resistanceHigher Tarnish resistanceBetter Corrosion ResistanceReducing the effects of frictionIncreasing solderability

Different industries perform different types of metal finishing methods according to the required finishing actions. Here, you can see different types of metal finishing processes and you can decide which one to choose to obtain the surface finish.

Types of Metal Finishing

Abrasive Blasting

This method is commonly known as Sand-blasting. In this finishing process, high-pressure compressed air a centrifugal wheel is used against a metal surface to perform the desired finishing action, cleaning, or polishing. This process is typically a smoother and less invasive abrasion process.

Polishing & Buffing

Polishing and buffing are finishing processes used to improve the appearance of an item, remove oxidation, and give a smooth and lustrous finish by using metal polish or tarnish remover.

Polishing is done by using abrasive belts or discs to level surfaces, remove scratches and pits, and polish the surface leaving a brushed or lined finish while buffing is done by using a rotating cloth wheel.

Powder Coating

Water and oil-based paints are also used to coat the metal surface against corrosion but powder coating can provide greater thickness than a liquid coating.Industries like tools manufacturing, automotive industry, and military applications mostly used powder coating techniques which involves or heat curing of dry thermoplastic or thermosetting polymer powder onto the metal to form a single textured, matte, or glossy coating layer.

Hot Blackening

In this method, a layer of black oxide is applied to the metal surface to create a black matte finish to improve durability, resistance against abrasion, and prevent corrosion. This method is commonly used in the production of automotive parts, tools, and firearms.

Conclusion:

Some factors must be considered when choosing an industrial metal finishing service. Cost is the most important factor, so you should choose a metal finishing type that gives you similar results at a lower overall cost by substituting a less expensive metal.

Another factor that needs to be considered is the hardness of the metal surface on which you're working. If you have hard metal then you need intense and strong abrasive. Don't go overly abrasive on the soft metal surface, this could result in damages to its part.

To know more about visit: https://www.peregrinemetalfinishing.com/

A Search Engine Optimization (SEO) Specialist analyzes, reviews and implements changes to websites so they are optimized for search engines.