Https //ij.start.cannon - How do I setup my Canon printer wirelessly?

A new purchased (or older) Canon printer needs to be set up. First, ensure you’ve installed the latest drivers and software from a valid site, for example – ij.start.cannon or https //ij.start.cannon and http //ij.start.cannon. The wireless and wired models require drivers and software; therefore, each has to undergo one important installation process. If your printer model isn’t set up yet, you can get started now. Ij.start.cannon offers a type of printer including PIXMA, SELPHY, MAXIFY, etc. canon.com/ijsetup has some factors need to be in mind while choosing an inkjet printer for you.

Https ij start canon troubleshooting –

If you encounter any issues during installation through https://ij.startcanon, you can retry setting up your printer. Or you can directly contact the Canon printer support team to resolve your problems.

Ij Start Canon Printer Setup:

Go with the below steps for quick Canon ij setup –

• Go to ij.start.cannon using web address.

• Enter IJ printer model name.

• Download appropriate canon printer drivers.

• Double-click to install the software [EXE or PKG].

• Follow on-screen instructions to set up Canon printer.

Wireless LAN Setup:

Turn on your Canon printer to start the wireless LAN setup.

• Then simply press the menu button and see Network settings where you need to tap on Wireless LAN settings and select the SSID Settings option.

• Select Access Point and choose the favored network name.

• Next, enter the WiFi security key and wait for the connected prompt.

• Now download canon ij setup from https //ij.start.cannon and install on your pc.

WPS Push Button:

Set up a successful network connection for the Canon ij printer, press the WiFi button on your printer, and go to the access point once the orange alarm light becomes steady. Within two minutes, push the WPS button on your wireless router. If you can see Connected Status, press OK to confirm.

3- Reset Your Canon Printer

Resetting the Canon printer may not be necessary if refilling the ink tank is sorted out. However, if the printer isn’t printing in good quality as previously did, then you’ve to reset it through the below steps;

• If your Canon printer model is turned on, turn it off.

• Now, press the Stop or reset button.

• Release the Stop or Reset button and hold power ON button.

• At the same moment, press the stop/reset button two times.

• Make sure you are still holding the power button while tapping the reset button.

• Now, leave the power button.

• Wait for a few moments until you see the idle message.

• After the message is on display, open the cover on the top to see the cartridges.

• Take out ink cartridges and Put on the cartridge holder cover.

• Turn off the Canon printer.

• Close the top cover and start the printer again.

• When the printer gets turned on, out cartridges back and see whether the Error Code 5200 has disappeared or not.

Read Full Information Visit us : ij.start.cannon

Jim is a software developer. He has expertise in making people aware of the new software technologies. He writes for https //ij.start.cannon