Best Ways to Replace Kitchen Cabinet Hardware

If your kitchen cabinets are looking a little worn and outdated, but you're not ready to replace them yet, consider replacing the cabinet hardware. It's a quick and easy way to give your cabinets a new look without spending a fortune. You'll be surprised at just how much difference some new cabinet handles and knobs can make.

Choosing the right hardware may seem simple at first, but it can be an intimidating category to shop for. The options are numerous, and the dimensions can be a bit confusing. And because cabinet hardware gets so much used, it’s important to choose pieces that will not only look great but also function well for years to come. From choosing hinges and handles to knowing the best ways to replace kitchen cabinet hardware, we’ve got you covered with our handy guide.

How to Choose the Right Kitchen Cabinet Hardware

It's easy to get lost in the world of knobs, pulls and other cabinet hardware, but if you know a few basics, it can be easier to choose the right product for your project.

Here are a few tips on how to select the right hardware:

Consider How Often You Access Your Cabinets and Drawers

If you have kids in your home or live in a space where people frequently open and close cabinetry, make sure to choose a durable finish that can withstand rough handling and constant contact with grubby hands and fingers. However, if your kitchen is more traditional in style and you rarely access your cabinets, cabinet pulls may be the better option for you.

Size Matters

Knobs and pulls should be proportionate to the size of the cabinets they'll be attached on. If you have tall upper cabinets, choose hardware that's at least an inch-and-a-half long, with a larger knob or pull. For lower cabinets, a length of three inches will often work best. The measurement doesn't need to be exact; just make sure you're close.

Consider Your Kitchen Design Style

Whether you’re going for a modern look or a more traditional feel, the style of your cabinets will influence the type of hardware you choose.

How to Replace Kitchen Cabinet Hardware

To replace your cabinet hardware, follow these three easy steps:

Step 1: Remove Your Old Pulls and Knobs

Before you can install your new cabinet hardware, you need to remove the old stuff. The method for doing this will vary depending on the type of hardware you have.

If your knobs or pulls are attached with screws, simply remove those by unscrewing them with a screwdriver. If the fasteners are concealed beneath plastic caps or decorative rosettes, use a small flathead screwdriver or putty knife to pry them off.

Step 2: Clean the cabinets

Wipe down the exposed areas where new hardware will be placed with some warm water and dish soap. Once they're dry, you can use a tack cloth to remove any residual dust before installing new hardware.

Step 3: Prepare for Installation

Once you've removed all the old hardware and cleaned the cabinet, it's time to attach your new pieces. Place a template on each door where you plan to install knobs and pulls if you have one. Follow its directions for positioning, or just place the knob in the center of each door near the top and bottom edges. If you're using new hinges, start by drilling pilot holes in each hinge into the cabinet door, using a center punch or drill bit that's slightly smaller than the hinge screws. Then, use a screwdriver to secure the hinges in place with their screws.

Looking to Update Your Kitchen? Remodel Your Kitchen with Us

The kitchen is one of the most-used rooms in the house, so it's important to make sure that it's updated and organized. Whether you're looking for a small improvement to your kitchen cabinet or a complete kitchen makeover, we can help. With our cost-effective kitchen remodeling services, we can update your kitchen and have it looking good in no time—all while staying on your budget.

Contact Alabama Landsource for all your Alabama land for sale needs or even your homes for sale in Alabama.

John is an Real state blogger and marketing manager. He maintains keen interest ongoing and development within the marketing and business space.