Chemtex Boiler Antiscalant Chemicals for Safe & Clean Boiler System

Principal reason behind formation of boiler scales is due to precipitation of impurities and suspended solids present in feed water, used for boiler operations. Feed water contains dissolved minerals (Chloride, Sulphates, Silicates of Sodium, Potassium, Calcium, Magnesium, Barium) and impurities (Oil Contaminants, Sludge, Lime) that in due course gets accumulated over the surface of boiler internals, leading to formation of scales. As feed water gets transferred to heater, the dissolved solids and impurities begins to precipitate at the base, the salts being left out. Continuous accumulation of salts and when it exceeds the solvency, results in formation of scales.

The presence of calcium, magnesium salts, and a high concentration of silica are the major causes of scale formation. It consists of carbonates, bicarbonates, sulphates, etc. Along with dissolved salts, there are also some suspended solids in the boiler feedwater that get precipitated as sludge. These are not hard as compared scales, but if it is overlooked, sludge gets hardened due to continuous heating in the boiler.

Characteristics of most common deposits

• Carbonate deposits, large granules and porous, forms dense and uniform pitting and scaling over the surface
• Sulphate deposits, crystalline, fine particles but a bit harder and denser than a regular carbonate deposit
• Hard and not so easy to remove silica deposits, extremely small, forms a dense and impervious scaling
• Iron deposits

Adverse effects of Scaling / Scale Deposits in Boiler Operations

• Brings down boiler efficiency as the scale formed over the metal surface acts as heat insulator, forbidding optimum transfer of heat, causing boiler tube to overheat and fail.
• Plugging / Irregular deterrence
• In general, boiler deposits can cut operating efficiency,
• Unscheduled boiler shut downs
• Increases in damage and repair cost, at times even leading to replacement

To ensure an efficient process and quality steam production capacity of the boiler system, it is necessary to maintain correct water conditions, chemical treatment being one of the counteractive measures. Chemical treatment is necessary to remove heavy deposits of water scale and metal oxides very effectively. Since boiler operates for 24 hours every day, proper precaution should be taken to avoid any disturbance of boiler

Chemtex’s Boiler Antiscalant Chemicals are complete organic formulations, based on polyphosphates, organo-phosphonates and polyacrylics that not only helps manifesting optimum efficacy in removal of mineral scales, metal oxide, hard deposits of water scale, iron oxides, oily contaminants, sludge, lime, and greasy deposits from the boiler internals but also does not form any precipitates or leaves behind any residues. Using this formulation to inhibit scale deposition ensures complete protection of system metallurgy, providing a long service life for the boiler system. It can be directly dosed into the feeding system, reducing the usage of corrosive acid.

Features

• Potent substitute to use of corrosive inorganic acids
• Accidental overdosing does not possess any hazard to boiler metallurgy
• Leaves behind no residues on metal surfaces
• Inhibits sludge formation due to metal ions and metal oxide deposits
• Keeps the boiler internals clean and minimizes down time for maintenance
• Enhances heat transferability, saving energy and cost

For more information on our range of Antiscalants, click here.

The name Chemtex depicts Chemical Technology Experts. The early 1970s saw the foundation of Chemtex. And in the following decades, it expanded with its variety of indigenous chemicals and industries catered.