The Common Applications of Waste Tires or Old Tyres

The Common Applications of Waste Tires Are Roughly as Follows:

1.Grinding to Powder

For grinding, after the tire is broken, it needs to be base with a pulverizer to reuse the tire patches to different morass. Rubber greasepaint with different morass can be used for different purposes, similar as rubber track, reclaimed rubber, fine rubber greasepaint, etc. This is also the processing process chosen by utmost manufacturers. Compared with the cost and profit, the benefit of grinding used tires to greasepaint is fairly high.

2. Cracking oil refining

Steel line is separated after tire shredding, and also cracking and refining is carried out. still, both the cost and the threat factor are high, thus, it’s substantially used by large enterprises similar as state- possessed enterprises. Private enterprises can also consult original programs and cracking oil painting refinery manufacturers for evaluation.

3. Cement kiln incineration

Cement kiln substantially uses the combustion performance of tires to transfigure thermal coffers. The disposal process is fairly simple, the tires only need to be broken into blocks.

The waste tire processing line is mainly used for tire cracking oil refining. Before the waste tires are subordinated to thermal cracking, they need to be crushed and separated sword line to achieve the purpose of crushing and volume reduction and reducing transportation costs. The waste tires will be crushed and separated from the sword line by the waste tire processing product line, and also turned into rubber blocks and transferred to tire cracking and enriching series outfit to putrefy the waste tires into sword line, carbon dark and energy oil painting, and break the black pollution. Cracking oil painting refining not only creates green profitable benefits, but also promotes the original environmental protection.

The waste tire processing product line is a large- scale tire processing outfit that fully separates the three major raw accoutrements contained in the tire rubber, sword line and fiber at one time at room temperature. The waste tires recycling line can reclaim tires with periphery range from 400 to mm according to client conditions, with strong connection, and the affair can reach 400- 60000kg/h. The product line runs at room temperature without any chemical complements and won't beget secondary pollution to the terrain. The waste tires recovering product line adopts PLC control system, which is easy to operate and maintain, and has the characteristics of low energy consumption and long service life.

Generally, 1 ton of waste tires( rubber) can produce about0.35 tons of carbon dark,0.45 tons of waste rubber oil painting, 0.12 tons of sword line and some combustive feasts through thermal cracking. Compared with disposal styles similar as waste accumulation, tip and incineration, thermal pyrolysis technology is safer and further environmentally friendly, saves energy, and has good comprehensive frugality, which is in line with the development trend of the times.

still, although scrap tires are classified as" waste", their value can not be undervalued. Waste tires contain a lot of essence and rubber, and have high recycling value. They're a lost resource with title of honor of" black gold". The disposal process of waste tires is fairly complicated, and different outfit will be named for processing according to conditions on finished products and finished sizes.

https://www.shreddingtech.com/waste-recycling-lines/domestic-waste-sorting-lines.html

Zhengzhou Hongsam Digital Science and Technology Co., Ltd. https://www.hongsamdigital.com/