Ways to Use Hardwood Flooring Refinishers Near Me

Hardwood floors are aesthetically appealing when taken care of. But if they haven’t been maintained or refinished for many years, then the floors will end up in terrible condition. Since refinishing the whole house’s floors can be a challenging as well as tiring job, you can consider hiring some professionals for hardwood flooring refinishers near me to do the project. But if you want to save that extra money, you can choose to do it yourself. Do you want to know some of the best tips that will help in doing the job in a much smoother way? Keep reading the article till the end.

Keep moving and keep a check on the cord

The first rule while refinishing the hardwood floor is to continue the movement without stopping in between. The biggest risk in sanding your floors is holding the movement and randomly sanding a hole into the floor. The drum sander is a powerful tool and has the capacity to do that in no time. Thus, be careful while the sander is on and keep moving.

The cord that comes with the sander is too long and clumsy. It can be your biggest obstacle while doing the job. So, do not forget to keep an eye on it while you are refinishing your hardwood floor. Otherwise, chances are there you might trip over it.

Use the Grain for Sanding and choose a good sander

The sander will put marks on the floor, and these marks cannot be ignored, no matter how many grits are being used. They will be nearly undetectable if the sanding is done in the direction of the grain, as the grain will hide any kind of marks. Thus, it is advisable to sand with the grain and not perpendicular to the grain.

It is important that you get a good sander, especially if you choose to rent it out from somewhere. Otherwise, the work gets doubled and you definitely don’t want that.

Have a friend with you and purchase extra sandpaper

The drum sander that you choose to bring home can be heavy. In such a case, there can be no way you can lift the sander from the car yourself and get it inside. Thus, finding a friend is advised for no reason but to help you get the sander in and out of the car.

It is always better to purchase a few extra sandpapers for hardwood flooring refinishers near me in case your sander is slightly more shrunk. Also, if you have a very sticky floor, you might end up tearing up your sandpaper faster.

Put your flooring finish applicator inside the refrigerator

Dealing with the applicator after every coat can be time-consuming, especially in oil-based polyurethane, as that stuff is difficult to wash. Hence, water-based polyurethane will work fine or the best way to get rid of the polyurethane is to dip the applicator in a big-sized bag and then keep it inside the refrigerator. This stops the applicator from turning dry and allows you to use it many hours later without washing.

Blackhawk Floors, Inc. is a hardwood flooring company providing installation, cleaning, inspection, repair, refinishing ( www.blackhawkfloors.com/Hardwood-Flooring-Refinishers-near-Me ), and recoating services in Phoenix, Scottsdale, Flagstaff, Tucson, Goodyear, Prescott, Paradise Valley, Payson, and Chandler, Arizona. To know more, visit https://blackhawkfloors.com/about-us/.

I'm a freelance copywriter and I write on a variety of topics.