Slip On Flanges Stockists

The relationship with the line is done with 2 filet welds, too at the outside as other than at inside the Raised Faced Slip-On Flanges. Level Faced Slip-On Flanges have a lower material cost than weld neck spine and are everything viewed as the more accommodatingly changed. Our Carbon Steel Slip On Flange Manufacturers workplaces can complete any level of courses of action. Slip on pipe spine may what's more be used a lap joint ribs expecting Type B or Type C stub closes are used.ASME B16.5 Slip On Flange and ASME B16.47 Series b Carbon Steel Slip On Flange may be added to the farthest furthest extents of a line or to at any rate one terminations of a line fittings. treated steel slip on rib is organized so the presented finish of the line or fitting is confounded or short of the spine face by the thickness of the line divider paying little regard to 1/8 of an inch. This considers a filet weld inside the Slip on rib obfuscated from the thickness of the line divider without hurting the rib face. We are ASME B16.5 SORF Plate Flanges and Slip On Flange Manufacturers in India.

Specification of Slip on FlangesASME B16.5 Slip On Flange Size Chart1/2" (15 NB) to 48" (1200NB) DN10~DN5000Slip on threaded flange StandardsANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092SORF Flanges Pressure Rating ANSIClass 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Slip on pipe flangeSlip On Weld Flange Pressure Calculation in DIN6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 SORF FlangesJIS5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Slip On Weld FlangeUNI6Bar 10Bar 16Bar 25Bar 40Bar Slip on threaded flangeEN6Bar 10Bar 16Bar 25Bar 40Bar Flat Faced Slip-On FlangesCoatingOil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized ASME B16.47 SORF FlangesMost common types of Raised Faced Slip-On FlangesForged / Threaded / Screwed / PlateTest CertificatesEN 10204/3.1B

Raw Materials Certificate

100% Radiography Test Report

Third Party Inspection Report, etcProduction technique

• Forged, Heat treated and machined

Connect Type/ Flange Face TypeRaised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, GrooveSpecial design

As per your drawing

AS, ANSI, BS, DIN and JIS

15 NB (1/2") to 200 NB (8")

Equal and Reducing Configurations

TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detectorEquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etcOriginIndian / West Europe / Japan / USA / KoreanSlip On Flange Manufacturers

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.

SORF Flanges: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

• B.S: BS4504, BS3293, BS1560, BS10
• AS 2129: Table D; Table E; Table H
• ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
• ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• American standard (ANSI)
• German (DIN)
• British standard (BS)
• DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Flat Faced Slip-On Flanges
• The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

Slip on threaded flange Uses & application

• Bitumen upgraders.
• Heavy oil refineries.
• Nuclear power (mostly seamless).
• Petrochemicals and acids.

Omaa Metal Source manufacturer, exporter of Butwled fitting, Forged fitting, Flangs, Fasteners, as per customers project, drawing.