How To Troubleshoot and Fix Audi Pre-Sense Malfunction in Birmingham?

Generally, Pre-sense is a proactive and protective safety technology in the Audi that can provide you with a safe driving experience by preventing sudden collisions on the road. During an emergency maneuver on the road, the Pre-sense technology is closing the side windows and panoramic sunroof and the front safety belts and the brake systems are responding immediately.

On the other hand, it is the most useful feature in your Audi that can alert the driver about safety problems before they occur. Subsequently, they are based on the sensors installed in your car. When the sensors of the Pre-sense system have any problem, it will give a warning sign to alert the driver to apply the brakes immediately.

What do you mean by the Pre-sense system in Audi?

Thus, the Pre-sense is a radar and collision detection system in your Audi that can keep you and your passengers safe on the road. This technology can run your Audi safely on the road by preventing crashes because it is responding to the upcoming hazards on the road faster than human beings.

Moreover, the whole technology is relying on the cameras and radar sensors on the front, rear, and side of the car for detecting other road users and pedestrians. When the onboard computer detects any collision, the Pre-sense system engages the safety mechanism. In this way, the electronic stability control will prevent skidding issues in the car.

While driving the Audi on the road, the Pre-sense system is monitoring the other vehicles surrounding your car and measures the relative distance and speed of the car. When it happens, it alerts the driver through some audible and visual clues for determining the collisions. In this way, sudden collisions and accidents are prevented to protect you.

Steps performed by the Pre-sense system

To keep a close eye on the dangers around your Audi, the Pre-sense system are using cameras and radar sensors. If a collision is imminent, the system can perform the below steps:

• To reduce injuries, the front seat belts tense automatically.
• To block the debris to enter the car, the windows are closed immediately.
• When any dangerous situations occur, the warning lights activate to alert the drivers.
• Enhance the monitoring capability and measure the braking mechanism.

Causes behind the malfunctioned Pre-sense in Audi

• The Flash memory module controls the Pre-sense and emergency braking systems in Audi. When it fails, the Pre-sense malfunctions with an error message,
• Radar sensors are managing the functions of the Pre-sense system. If too much debris or dirt contaminated the radar, it will affect the functions of pre-sense.
• The pressure sensor can determine each tire's pressure and function with a Pre-sense system to determine low air on tires. If it stops functioning, it sends wrong information to the computer that can affect the engine performance and Pre-sense operations.
• Short circuits due to the pinched wires in your Audi may malfunction the pre-sense system under the passenger seat. This is also caused due to the water leaking into the fuse box.
• In many cases, the damaged brake lines can affect the functions of the Pre-sense system. At this point, when you press the brakes on a wet road, it will skid before stopping that can lead to serious accidents on the road.

How to fix malfunctioned Pre-sense in Audi?

1. Wash your car and ensure that the windscreen is clean. In this way, the Pre-sense system cameras and sensors are operating immediately.
2. Check out the paint protection films of the car because these application protection films are putting an adverse effect on the functions of the Pre-sense system.
3. To keep the Pre-sense system to its original settings, you have to adjust the sensitivity of the Pre-sense settings from early to medium.

Conclusion

Whenever the Pre-sense system of your Audi is failed, you have to troubleshoot and fix the problem as soon as possible for safety concerns. A well-functional Pre-sense system can limit accident damages and reduce injuries on the road.

If you found that the Pre-sense system in your Audi is malfunctioned or stopped functioning, then consult with your nearest certified auto repair shop for determining the causes behind the problem and resolve the issues smoothly.

We at Momentum Motorworks are one of the most sought after german auto specialist in Birmingham. We offer specialists level maintenance for all models of Audi, BMW, Mercedes and Porsche.