Mobile Cell Phone Keypad Not Working Problem and Solution

The keypad problem is a common issue when you are using your mobile cell phone and it will not turn on or press any button. The keypad Problem can be caused due to water damage, rust, or dirt which may cause problems with the LCD screen display and keypad track. If you have such type of problem then try these simple steps mentioned below and fix your Mobile Cell Phone Keypad Not Working Problem.

Keypad Problem is usually caused by rust or water damage.

Keypad Problem is usually caused by rust or water damage.

• Check the battery terminals. If they are rusty, it can cause a short circuit and damage your phone's keypad.

• Check the battery. If you're not getting enough juice to power all of your buttons, then it's time to replace that old battery and get back in touch with life again!

• Check the power button: Is it stuck down? Is there any debris lodged inside its crevices? You should also look at other parts of this device such as the screen, speaker grill, and even microphone if possible (though highly unlikely).

First of all, you will have to check its (Mobile Cell Phone) on and off button if it is working perfectly.

First of all, you will have to check its (Mobile Cell Phone) on and off button if it is working perfectly.

Checking the power button is very important, because if there is any problem with this then you can use your mobile phone in a different way. If it's not working properly, then replace it with a new one.

If the mobile cell phone is not turning on, then you will have to remove its battery and reinsert it after a few seconds.

If the mobile cell phone is not turning on, then you will have to remove its battery and reinsert it after few seconds. To do this, turn off your mobile phone and press and hold down the power button for at least 8 seconds until all lights are off. Then remove the back cover by pressing and holding down both sides of the removable battery compartment.

Remove any SIM cards or memory cards from your device if possible. Slide up on both sides of each card slot until they click into place (if needed). Press firmly until you hear an audible click sound indicating that it has locked into place securely enough that no further movement is possible without damaging them further; repeat this step for both sides if necessary before reinstalling them into their respective slots again once finished doing so!

Still keypad problem is not solved then take a LCD screen and connect with keypad connector.

You can also try to remove the LCD screen from the mobile and connect it with keypad connector. Press any key on keypad, if there will be no light on LCD screen then it means that there is a problem in keypad track which is connected with on off switch.

Now press any key on keypad, if there will be no light on LCD screen then it means that there is a problem in keypad track which is connected with on off switch.

Now press any key on keypad, if there will be no light on LCD screen then it means that there is a problem in keypad track which is connected with on off switch.

Now try to check their corresponding tracks according to the type of mobile cell phone:

Your Phone Keypad Is Not Working Cell Phone Repair in Vancouver Can Solve Your Problem In Very Short Time.

• For example, if you are using Nokia Lumia 510 or Nokia Lumia 520 then press "End" button and see whether there will be any response from your mobile cell phone? If it doesn't work then check whether all other buttons are working properly or not? If they are working properly then only one button should be having problem due to which other buttons won't work.

If your mobile cell phones keys are not working properly then you can repair them easily at your home without going to mobile cell phone repairing shop.

If your mobile cell phones keys are not working properly then you can repair them easily at your home without going to mobile cell phone repairing shop.

You need to check the problem first and then fix it by following these simple steps:

• First of all, you have to remove the battery from your phone and put back in again after checking if there is any damage on it or not; if yes then replace it with new one.

• Now take out SIM card from its slot so that you can insert it into another slot in order to activate or deactivate service of that particular device again; otherwise make sure that both SIM cards are inserted properly before turning on power button of mobile phone so as to avoid any problems during operation process like call drops etcetera..

Conclusion

If your mobile cell phone keys are not working properly then you can repair them easily at your home without going to mobile cell phone repairing shop.

Our hair wigs for cancer and alopecia patients are at discounted rates. The hair extension price is low and affordable at Cortex Hair Indore. https://cortexhair.co.in