An introduction to sound isolation control products

Sound isolation control products might sound like some obscure concept whose secrets are locked deep down within a hidden vault, but sound isolation is actually a pretty simple process, thanks to contemporary sound isolation mounts.

Allow us to spin the wheel to the ideal number combination and take a peep within that is not that that secret vault for a primer on sound isolation.

When any type of motor is safeguarded to a solid structure, the energy it will give out shall transfer to the structure on which it is mounted. The end result of this every transfer is vibration. This is true whether the mechanized equipment is an electrical motor like that found in vehicles and equipments or it is a pump or a fan.

The resulting vibration can be an annoyance; needless to say a possible cause of damage in and of itself, but it holds the possibility to create other undesired side effects such as noise and reductions in the functionality and performance of the equipment. To palliate such issues, isolating the sound is important according to law enforcement soundproofing. And this is where sound isolation mounts come into play.

As the name suggests, these mounts are mounted between the structure and the motor to which it is safeguarded. Then they go to work by lessening the energy that is transferred between the two structures.

Sounds simple enough, right? But there is still one more factor involved. To make sure the connection between the solid structure and the motor to which it is attached provides precisely the ideal resiliency, you should choose the right mount for your particular application.

Sound isolation mount options run the range from low frequency rings and square mounts to center bonded mounts, flex mounts, plate mounts, and bumpers and feet. How do you know which one is right for your specific situation? The apparent answer is to contact a reputed manufacturer or custom engineered products meant for noise control for commercial premises. Such a company will rapidly steer you in the right direction.

If you would rather take chances in finding out on your own, keep this in mind. An improper mount for the application of noise control for hospitals it serves can actually do more damage than good. The high frequency vibration will be lessened, possibly leading you to believe that the issue has been resolved. Nonetheless, at lower frequencies, the vibration might actually increase. So do your homework and select your sound isolation mount prudently.

One final aspect you might want to take into consideration with your sound isolation mounts is damping. By lessening the amplitude of the resonant vibration, the addition of damping will enhance the mounts response considerably. Moreover, damping also lessens the amount of deflection necessary to absorb shock, thereby offering better protection of your equipment.

Since 1998, O’Neill Engineered Systems has been specializing in the custom design and installation of noise control products and systems to help you control noise. We can provide on-site acoustic analysis,