All description about Plaster Sand

Most people do not know there is a different type of sand for plastering. Usually, river sand that occurs naturally is used for any type of plastering work. While for bricklaying, normal sand is widely used to give your building walls an aesthetic appeal or a protective covering, it is better to use plaster sand. Plaster sand is different from building sand. It is finer-grained and clean that can be used for internal and external rendering.

What is plastersand?

Plaster sand is fine-grained sand that is washed to remove salt, clay, and other dirt from within it. The grains are smooth and round, with no sharp edges. So, when it is used, there is a lower risk of salt stains or atmospheric moisture absorption and gives a smooth finish to where it is applied. Since when dried, it neither shrinks nor cracks, it is a preferred choice over the normal sand for rendering.

Where can you use the plaster sand?

Plaster sand is predominantly used in construction works mainly for two reasons, rendering and plastering. It is primarily used when mixing plaster for walls.

Plastering: The sand is used for making an even coating of mortar mixtures on the underlying brickwork and the ceiling of the house. The smooth and attractive finish this plaster renders; makes it easier to paint and apply tiles or wallpaper. Since the plastering sand is already washed, it reduces the risk of moisture absorption. When applied, it gives a crack-free and consistent finish. It can be used to fill up cracks.

Rendering: In terms of construction, rendering is about forming a coat on the exterior walls of a building. If you are using coarse or gritty sand to lay the bricks and give strength to the building, you must use finer sand for the finishing coat. It not only gives attractive look but also protects it from fire and water.

When to mix plaster sand in mortar?

For any construction work, you need to create a mortar mixture. It is nothing but a mixture of sand, cement, and water. But, for different areas, you need the ingredients in varied proportions. The sand you will select will also differ. Harsher sand is suitable for bricklaying purposes, plaster sand can be used to make plastering and rendering of preferably the internal walls. It will give a smooth finish with a flat surface that will be later easier to paint over.

Many business houses will make you understand the different varieties of sand available in the market. They will also guide you as to which variety will suit your requirements.

============================================================================================================================================Details :The foundations of a strong, growing economy lie in its construction and infrastructure sector. And sand, is one of the critical inputs, for this sector. At one end, is the challenge of fast disappearing natural source of sand, whilst at the other, is the lack of easy market access and delivered quality. Thus was born, the idea of Doctor Sand - to re-define sourcing in the construction industry, by offering ethically sourced, branded sand and other minerals, with a promise of consistent delivered quality. The brand and logo attempts to capture, the fast vanishing, natural source of sand and the need to enhance the quality of sand and make a positive impact on the sector and the environment. Doctor Sand Ltd, is a fully owned subsidiary of CDE Asia. Founded in 2006, CDE Asia, is one of the leading manufacturers of wet-processing equipment, serving a constellation of 24 countries in the Indian subcontinent & South-East Asia - providing patented solutions, to overcome the growing shortage of natural sand, recovering value from low-grade minerals and solving the problem of C&D waste disposal, by offering novel recycling techniques to recover useful construction materials.

Doctorsand stands prepared to give you a hand in shaping the cities and societies of tomorrow, through all the challenges that arise.