Stainless Steel 310 Sheets & Plates Manufacturers In India

Stainless Steel 310 Sheets are used for heat applications such as furnace parts and hotness procedure tools. Stainless Steel 310 Coil is Austenitic stainless steel developed for use in temperature corrosion resisting applications. 310/310S Sheets & Plates are readily fabricated by standard industrial procedures. SS 310 Sheet can be quickly bonded and also refined by typical facility fabrication methods. To stay clear of getting too hot or burn-through of thinner sheets, a greater welding rate needs to be used.

It's important to note that the main difference between hot rolled and also cold rolled steel is just one procedure. "Hot rolling" refers to handling made with heat. "Cold rolling" describes processes done at or near space temperature level. With Cold Rolling, its thickness is decreased to exact gauges. Stainless Steel Din 1.4841 CR Sheets are hot rolled products that give a remarkable surface area coating, with boosted physical homes of the steel, such as high formability, high stamina, superb damage resistance, and are offered in coils and sheets.

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality!Specification Schedule of Stainless Steel 310 Sheets & PlatesSS ASTM Standard SpecificationASTM A240 / ASME SA240International Standard

• ASTM A 480
• ASTM A 959
• ASME IID
• EN ISO 9445
• EN ISO 18286
• EN 10051
• EN 10088-1
• ISO 15510

Size Range

• Cold rolled ASME SA240 Stainless Steel Sheet 0.5-6.4 mm
• Hot rolled ASME SA240 Stainless Steel Sheet 3.0–10.0 mm

Thickness0.1 to 100 mm ThkWidth10-2500mmLength2m, 2.44m, 3m, or as requiredFinish2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.HardnessHalf Hard, Soft, Hard, Quarter Hard, Spring HardFormSheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate manufacturer and SupplierChemical Properties of Stainless Steel 310 Sheets & PlatesSSMnPSCSiCrMoNiFeASTM A240 3102.0 max0.020 max0.015 max0.015 max0.15 max24.00 - 26.000.10 max19.00 - 21.0054.7 minMechanical Properties of Stainless Steel 310 Sheets & PlatesMelting RangeDensityTensile Strength (PSI/MPa)Yield Strength (0.2%Offset) (PSI/MPa)Elongation %1402 °C (2555 °F)7.9 g/cm3Psi – 75000, MPa – 515Psi – 30000, MPa – 20540 %Equivalent Standard of Stainless Steel 310 Sheets & PlatesSTANDARDUNSWERKSTOFF NR.SS 310S310001.4841

For More Information:

Visit Our Website: https://www.chhajedalloys.com/index.html

Contact No: +91-932-111-3630

Email I'd: info@chhajedsteel.com

All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality!