Fall Prevention Systems – How They Safeguard Bucket Trucks And Roofing Jobs

The residential and commercial construction industry has always been the subject of criticism owing to the high fatality and accident rates witnessed at project sites across the world. This is the reason why, at least in the US, many safety and security norms have been laid out to ensure that most of these mishaps are prevented. In an effort to reduce fatalities in the residential construction workplace, in 2010, the OSHA made significant changes to their fall protection guidelines. If the job requires a person to work at a height of six feet in the air or more, the use of fall prevention systems becomes mandatory.

The norms for fall prevention and protection have been clearly spelled out in these guidelines.

• For residential roofing jobs that call for a worker to be higher than 6 feet in the air, they are required to be protected by the use of guard-rail systems, safety net systems, or personal fall arrest systems.
• In case the work situations are such that the use of these systems will create an even bigger hazard for the worker if deployed at the workplace, the employer will have to device and implement a fall protection plan. This plan will have to be vetted and approved by the designated authorities who will analyse it on the lines of practicality, quality, effectiveness and more. Any changes in this protection plan will also have to be approved by the authorities before implementation.
• When working in aerial lift or boom-type platforms, including scissor lifts and bucket trucks, the worker must either have a guardrail system in place (where applicable) or be tied off.

These guidelines are strictly implemented by OSHA. Many reports and studies have pointed out that the proper and diligent implementation of these guidelines can prevent falls and accidents by a large percentage. The agency has taken it upon itself to ensure that the companies and entities operating in the construction industry realise their responsibility of ensuring the safety and security of workers. The agency has also take to imposing severe penalties on companies who fail to deploy the right fall prevention systems on their construction sites. Back in 2010, the OSHA proposed a $70,000 penalty against Johnson Controls for allowing their workers on roofs without fall protection. This fact is indication enough of their dedication for ensuring the safety of workers at construction sites.

There are all kinds of providers of fall prevention systems out there and you can get in touch with any one of them through the internet. Many suppliers even offer training and orientation to employees who will be using these systems after installation. These companies have websites that provide information on everything to do with these companies, including service features, customer testimonials and price considerations. You can get to know whatever you want from these online entities.

Compliance of proper rules is very important to ensure everyone’s safety. Visit CAISafety.com to know more about fall prevention systems!

About The Author

Brent Owens is a safety expert who works hand in hand with many construction companies across the country to ensure that employees are always protected while at work. He recommends CAISafety.com as the best name to trust for high quality fall protection systems.