Common Electrical Problems in Acura: Troubleshooting Guide

Encountering electrical issues while driving a high-end car like Acura would be the last thing you would like to face as it takes away all the pleasure from your driving experience. There are multiple factors that might cause your Acura to face electrical problems and it is important to learn the ways to troubleshoot your electrical issues.

Moreover, if you are not proactive in fixing the electrical issues in your Acura then it can damage the critical components. Here in this article, we will discuss the troubleshooting guide to the common electrical problems in Acura.

Check the Wiring & Connectors

At times, it is seen that faulty wiring & connectors are the root cause behind the electrical problems in your Acura. Due to bad connections, you may have to deal with intermittent or complete electrical system failure & you must start with taking a visual look at the wiring & the connectors to make sure that the connections are not unstable.

You must thoroughly check the areas near the moving parts and sharp edges as these are the places where the wires & connectors are especially prone to damages. Besides that, you must also check for loose connections as they can play spoilsport & it is crucial to make sure the connections are tight and free from any anomalies.

In addition to that, if you find presence of rust & debris on the connectors then you must use a contact cleaner to get rid of these contaminants. Furthermore, you can also use a continuity tester or multimeter to help you pick out broken or disconnected wires.

If you are able to detect any damaged or frayed wires or connectors then you must get in touch with a certified mechanic to help inspect the bad wires & connectors and initiate remedial measures.

Inspect the Battery

The battery is the most important electrical component in your Acura that provides the other electrical components with the required charge for their efficient functioning. Whenever you are looking for ways to troubleshoot the common electrical problems in your Acura then inspecting the battery is mandatory.

You must look for signs of corrosion, cracks, or bulges in your battery as corroded terminals can disrupt the connection between your battery and other electrical components. That is why many experts opine that you must get the corroded terminals cleaned with a wire brush and baking soda solution.

Besides that, it is also important to test the efficiency of the battery of your high-end car and for that you are going to need a multimeter and if your battery is giving you a reading of 12.6 volts when the engine isn’t running and 13.7 to 14.7 volts when the engine is running then it signals that the battery is healthy.

In addition to that, the cables in your battery must be tight & it must be secured in its place. Upon charging if the voltage of your battery is still low then the battery is aging & you need to replace it with a new one.

Examine the Alternator

The alternator is responsible for charging the battery when the car is running and also provides power to other electrical systems. The failure of the alternator is a serious electrical issue that needs to be addressed on a priority basis and if you are observing dim & flickering lights, drained battery, and abnormal sounds like whining or grinding then your alternator is at fault.

In addition to that, you must also inspect the alternator belt for development of cracks or looseness as a slipping belt can adversely impact the working of the alternator. The only way out is testing the alternator with a multimeter and if the reading is between 13.7 & 14.7 volts when the engine is running then the alternator is working fine.

However, if anything lower or higher than that then the alternator is defective & needs to be replaced.

Replace Faulty Fuses

There a lot of fuses in your Acura and they protect the connected circuits from excessive current flow and thus prevent the electrical components from further damage. In case, any fuse has gone bad then you should get it inspected and replaced as soon as possible.

Finally

The above-discussed factors are some of the ways to troubleshoot common electrical problems in your Acura. You should get in touch with a certified technician to get your Acura inspected & the electrical issues sorted.

We at Bruce Cox Imports are one of the leading luxury car repair and service facility located in Bellingham, WA. We are having years of experience in looking after imported cars like Acura, Genesis, Honda, Hyundai, Infiniti, Kia, Lexus, Nissan.