Four top watch maintenance Cheats-Rolex replica

The life of the watch and the wearer is about the proper use and maintenance of watches, watches look dirty, strap length discomfort, poor use of the environment, etc., are easily lead to damage to the watch and shorten life. High-end watches every two to three years should do the appropriate maintenance, testing and travel time performance and movement power consumption, regular servicing will effectively extend your use of the watch time. Four top watch maintenance Cheatsrolex replica watches

Waterproof watch

Waterproof watch rely table mirror, back cover, head, etc. waterproof apron to achieve appropriate standards. Water tables are all playing in the bottom cover with "WATER RESISTANT" or "WATER PROOF" English words. No waterproof mark watches only dust, avoid wet. 30 meters (3ATM, ie 3 atm) water table, can be used for daily grooming or in the rain, that water droplets splashing on the surface only and no pressure applied to the table. 50 meters waterproof watch suitable for swimming and general housework, 100 meters waterproof watch can be used for swimming and diving underwater work.

Waterproof apron aging will affect the watch waterproof, so watch waterproof apron and head (containing water laps) based on usage should be changed regularly. Quartz watch battery after each component must also replace the water in order to ensure good water resistance.rolex submariner replica

Water tables are not wearing any wash water bath, sauna or temperature changes very environment. Because waterproof apron will be affected by temperature, thermal expansion and contraction voids and causing accelerated aging water and table water condensation occurs, will make a serious mechanical damage.

Watch the "Anti"

In the national standards, anti-magnetic and shock performance standards is "residual effect" to express, residual effect refers to the pre-test and watch the instantaneous difference after detecting the instantaneous difference watch the difference.

Shock: When the watch is accidentally dropped from a height of 1 meter horizontal hardwood surface, the residual effect of the quartz watch no more than 2 seconds, the residual effect of mechanical watches no more than 60 seconds.rolex yachtmaster replica

Magnetically shielded: When the watch occasionally in intensity of 4800A / m magnetic field, the residual effect of the quartz watch no more than 1. 5 seconds, the mechanical male watch (movement area greater than 314 mm2) residual effect of not more than 30 seconds, the residual effect of mechanical female form is not more than 45 seconds.

Four top watch maintenance Cheats

In addition to water, by secret

Accidentally flooded inside the case, the available granular material called silicone watch with hydrocephalus have put together an airtight container for several hours, remove the watch, water that is all but disappeared. This method is simple and economical, accuracy and life on the table did not have any damage. Silica gel after water has been repeatedly be dried for several hours at 120 ℃, water absorption capacity can be recycled, but also used repeatedly.

Refurbished by secret

Watch Mongolia being excluded from a lot of road lines later, you can cast the first drops in Table twelve drops of water, then squeeze a little toothpaste obliterated, it can be removed leaving the designated pattern table Mongolia as new. Four top watch maintenance Cheats

Maintenance by the Secretariat

1. wear watches, the hands sweat on the case of corrosive, steel case because it is nickel-chromium alloy, corrosion resistance can be better, semi-steel case of copper, long-term contacts with sweat, easy corrosion, should often with a soft cloth wipe sweat or plastic table mat care to prevent the erosion of their sweat.
2. Do not open the form the back, so as not to affect the movement of dust into the normal operation of the watch.
3. Do the watch by placing mothballs in the wardrobe, in order to avoid the table oil deterioration.
4. Do not watch on the radio, on TV, in order to avoid magnetization.
5. Long-term storage does not wear a watch, should be wound once a month on a regular basis, so that part will not be long at rest, in order to ensure the operation of the printer properties.