When To Consider CV Joint Replacement in Your Car?

People want their cars to run smoothly and consistently which would comfort them. For that the power should be consistent. To have a consistent power at the wheels, the credit is given to not only the engine or the transmission, the whole drive train system. In the drive train system, there are various mechanical parts that take part in the power transfer process. The CV axle is one of them which has a very special function. The CV axle has CV joints that can move depending on the type of movement of the car to transfer the power. This joint can get worn and it would need replacement. Here you will know about the CV joints and also when to replace the CV joints in cars.

The CV joints functions

The CV joints are the part of the CV axle. CV stands for constant velocity, helps your car to run consistently and smoothly. the drive train components have a simple work, and that is to supply power and the torque to the wheels at every situation, but this is not a simple task. The car wheels move with respect to the car. That is while driving on rough roads or terrains, there is an up and down movement, and even in that time, the wheels should get the power and torque to run consistently. While steering, the wheels turn to that side where you are supposed to turn your car. At that time too the power and torque are consistently transferred to the wheels. This is done by such a mechanical component which is flexible in the power transfer, that is it can adapt with the change in the position of the wheels to consistently power transfer.

There are two types of CV joints that are found in cars. Those are the inner joints and the outer joints. The outer joints are connected to the CV axle and the wheel hub for the transfer of power in between then. The inner joint makes the connection between the CV axle and the transmission.

The CV joints move to function, and for that, they need lubrication. The lubrication is maintained by a CV boot made up of rubber which covers the CV joint and prevent the grease from leakage and do not allow the dirt and debris to the CV joint. The CV joints are very much vulnerable to the dirt and debris which can damage them.

When to replace the CV joints?

The CV joints are very much essential for the running of the car. If it is damaged, then you would not be able to make the car run properly. There would be high power loss and also some strange symptoms. Learning about the different signs of a bad CV joint can make you identify the problem easily. Here are some obvious common signs of bad CV joints.

Loud noise while turning

If your car shows this strange symptom of giving loud noises while turning, then the CV joint can be faulty. Because while turning, the CV joint adapt to make the transfer of power to the wheels. But if the CV joints would not move smoothly while you turn the car, then it would lead to clicking and popping sound.

Car bouncing while running

If your car is bouncing around even while the road is flat, then there can be some issues in the CV joints. Like the loud sounds, this sign can also be annoying.

Grease at the tire edge

If while inspecting your tires, you find grease on the tires edge, then this can be a sign of failing CV joint because the CV joint would wear due to the grease leak.

Conclusion

Get your CV joint replaced as soon as possible so that you would not face any problems while driving.

JCL Automotive is one of the leading automotive service and repair facility located in Hellertown, PA. We are proud to assist our customers in looking after high-end cars like Audi, BMW, and Mercedes.