What is the Necessity of Using GU10 Halogen Bulbs?

GU10 halogen bulbs can be easily recognized by means of the interlocking system of pins and slots. These bulbs mainly represent the traditional form of bulbs and they are quite easier to use. If you are interested in knowing the basic specifications of these kinds of bulbs, then you can visit within the official site of Energylightbulbs.

In most of the cases, halogen or quartz versions are available and the Led ones have been introduced in the market newly and this is the reason that they are using lesser in comparison to others. Ceiling fixtures and track lighting of the modern age can be formed of these kinds of bulbs. Moderate beans with brighter lights are being produced by these bulbs and you can install the same at any corner of your house. Socket-based prongs are found in these bulbs with the help of which they can be easily characterized.

What are the major features of these kinds of bulbs?

• GU10 halogen bulbs can be easily recognized by means of male and female sides. All these sides are having multiple pins and they are being positioned in an outstanding manner with the use of springs. Spring mechanism can be boosted up by means of pressing both sides of these bulbs so that the bulbs can remain in a straight position.
• The standard rules of light fittings are being abided by these bulbs and even the international standards are being matched up. They are having bayonet caps and that can be of varied types so that you can make selection of the best one that satisfy your concerned purpose in the best way.
• Base cap is almost about 10mm with a wider base. This is the reason you can easily recognize these bulbs while going for purchase at the online store.

Changing procedure of these bulbs

• Ladder is to be used so that you can stand straight at the time of changing the bulbs. This ladder will help you to do the concerned task without any hazard and you can take your own time in conducting the same.
• Existing bulb needs to be pressed so that the fixtures can be loosened and this is quite facilitating in opening the bulb.
• In this case, counter-clockwise movement is highly necessary so that inward pressing can be made. This will automatically help you to take off the existing bulb with greater convenience.
• The bulb can be directly pulled out from the socket area so that you can get the same in your hand.
• Old bulb needs to be discarded and on the other hand you need to open the seal of the new one so that it can be installed in that place. The new one must be of the same size otherwise that will not be fitted properly within the socket.
• The inner edges need to be pressed properly so that the new bulb can be fitted inside so that no hazards or disasters happen.

About the Author:

The writer is an expert in the field of Energy Light Bulbs with focus on Gu10 Halogen Bulbs and Gu10 Leds .

The author of the article has an extensive knowledge about the energy saving bulbs.