Directory Image
This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Privacy Policy.

Panel orientation and shading on Perth roofs: what really matters

Author: Fusion Sun Solar
by Fusion Sun Solar
Posted: Oct 18, 2026

When Perth homeowners think about solar, they usually ask how many panels will fit. A better question is where they will sit. Orientation, tilt and shading decide how much energy each panel produces and, just as importantly, when it produces it. Two identical systems on two different roofs can deliver output that differs by 20 percent or more, and the gap is almost entirely down to these three factors.

Why north has been the default.

In the southern hemisphere the sun tracks across the northern sky, so a north-facing panel receives the most direct sunlight over a full year. For Perth, which sits at about 32 degrees south, a north-facing array tilted at roughly 20 to 30 degrees captures close to the maximum annual yield. That is why installers have traditionally favoured north-facing roof planes and why most online calculators default to them.

But maximum annual yield is not the same as maximum value. A north-facing array peaks sharply around midday, which is exactly when most homes are empty and when exported power earns the least. If your household uses most of its electricity in the morning and evening, a layout that spreads production across the day can be more useful than one that maximises the midday spike.

The case for east and west panels.

East-facing panels start producing earlier and tail off after lunch. West-facing panels ramp up later and keep producing into the late afternoon, when Perth air conditioners are working hardest on a summer day. A split east-west system produces a flatter, broader curve, usually with a slightly lower total annual output than north-facing panels, often somewhere between 10 and 15 percent less per panel depending on tilt.

That lower total can still be a good trade. Consider these situations:

  • You work from home or have people home in the morning, so an east plane meets real demand.
  • You run air conditioning on hot afternoons and want a west plane producing when the load is highest.
  • Your inverter has a limited export or capacity, and spreading panels across two planes means less power is clipped at midday.
  • Your north-facing roof section is small, shaded or occupied by skylights, vents or a chimney.

Many Perth homes end up with a combination, such as most panels on the north plane plus a few on the west, which keeps annual yield high while lifting late-day production.

Tilt matters less than people think.

Most Perth roofs are pitched between about 15 and 30 degrees, which is already close to ideal. Tilting panels onto frames to chase a perfect angle usually adds cost and wind loading for a small gain, often a few percent. The exception is a flat roof, where installers set a fixed tilt. A low tilt of around 10 to 15 degrees combined with an east-west layout is a popular way to fit more panels while keeping wind loads manageable.

Shading is the silent thief.

Shade has a bigger effect than many people expect because of how panels are wired. In a traditional string system, panels are connected in series, so one heavily shaded panel can pull down the output of the whole string. Even a thin shadow from a power line, aerial or vent pipe falling across one corner of a panel can cut its output sharply.

Common sources of shade on Perth roofs include:

  • Neighbouring two-storey homes and new infill developments that were not there when you first assessed the roof.
  • Established trees such as eucalypts, jacarandas and palms, which grow back after pruning.

Remember that the sun sits much lower in winter, so a tree that is harmless in January can shade a whole array at 3pm in July. A good site assessment looks at both seasons, not only the summer sun.

Tools that handle shade better.

If shade cannot be avoided, there are ways to limit the damage. Microinverters and power optimisers manage each panel individually, so a shaded panel does not drag down its neighbours. They add cost, but on a partly shaded roof they can pay for themselves in extra yield. Another option is to design separate strings so that shaded panels share one string while sunny panels share another, and to choose an inverter with multiple maximum power point trackers.

How to check your own roof.

You do not need specialised software to get a feel for your roof. A few simple steps will tell you a lot:

  • Use a compass app on your phone to find which way each roof plane faces.
  • Look at the roof at 9am, noon and 3pm on a clear day and note where shadows fall.
  • Check satellite imagery for trees, neighbouring buildings and roof obstacles.

Getting a design that fits your household.

The best layout balances yield, timing, cost and roof constraints. Plenty of Perth households do well with north-heavy designs, while others benefit from a west or east plane. A local installer such as Fusion Sun Solar can inspect the roof in person, model shading through the seasons and explain the trade-offs between layouts, which is far more reliable than relying on a generic online estimate.

Orientation and shading do not make or break a solar investment, but they shape its performance for 25 years. Spending an hour on design decisions up front is far cheaper than living with a poor layout. If you want to compare notes with other Western Australians who have thought through the same questions, you can find more discussion on my community profile.

About the Author

Solar energy writer covering practical home energy topics in Perth, Western Australia.

Rate this Article
Leave a Comment
Author Thumbnail
I Agree:
Comment 
Pictures
Author: Fusion Sun Solar

Fusion Sun Solar

Member since: Oct 15, 2026
Published articles: 3

Related Articles