Seattle fiber cement siding

Fiber-cement siding is an alternative to real wood, engineered wood, and Seattle siding options. Although fiber cement has endured some largely unwarranted criticism concerning moisture issues following faulty installation, it remains one of the more durable siding products in the industry.

Durability of Fiber-Cement Siding

Fiber-cement siding has the durability of cement, a class 1A fire rating, is impervious to wood-boring insects, and is resistant to deterioration from salt and ultraviolet rays, even in the wettest conditions, and far less susceptible to warping in hot weather – both potential concerns with wood and Seattle siding, Fiber-cement siding is low-maintenance, impact-resistant.

Strength and Added Protection

At five times the thickness of most Seattle siding, lap siding is stronger and less prone to damage caused by windstorms and other minor impacts. Additionally, Fiber Cement siding is non-combustible, so it also offers the protection of improved fire prevention.

Fiber Cement Installation

Fiber cement may be heavier than vinyl siding or engineered wood, but it is still lighter than real wood or stone, which means it is not terribly difficult to install. Installation guidelines should be closely followed, particularly when it comes to cutting the product and keeping it dry. Cutting fiber cement is harder than cutting real wood; it requires pneumatic or handheld shears, a dust-reducing circular saw, or a diamond-tip miter saw. Cutting fiber cement will release silica dust into the air, so you should wear a mask when cutting.

Benefits of Seattle fiber cement siding

Fiber cement is a composite material made of sand, cement and cellulose fibers. Fiber cement siding is a great option to choose for the exterior of your home and has many benefits over vinyl or wood siding options.

Fiber cement siding is low maintenance and is resistant to impact, Fiber cement will not rot and is not vulnerable to termites, Fiber cement is much more resistant to fire than vinyl or wood siding, Fiber cement can be imprinted with designs to imitate wood-grain very well, even from close-up, Fiber cement is stronger and tougher than vinyl siding, Fiber cement siding is cost-effective, Fiber cement siding is paintable.

Installation of settled Fiber Cement siding

You can screw it or nail it depending on the look you want. The Circled products have a special channel that’s nailed to the wall and the siding snaps into place without any screws. If you use the panel, you have to flash between them to keep moisture from getting behind the siding.

It’s a very hard material, so it’s tough on saw blades and hands. If you were going to use the planks, it used to be that you had to also use corner boards because the cuts weren’t clean enough at the corners.

If you are interested in more information on this topic - or getting a quote for installing new siding, windows, roofs, decks, fences or painting - please visit http://www.synapseconstruction.com