Why Choose a Reputed Shot Blasting Machine Manufacturer in India?

Shot blasting machines are used for blasting media onto a part’s surface at a speed of around 270 miles per hour. The media is accelerated by compressed air, electric pumps (water jet cleaning) or blast wheels (airless). It is important to choose a reputed shot blasting machine manufacturer in India because blast results are based on the type of machine you have chosen along with the selected blast media and processing parameters. Always choose a reliable company whether you are buying shot peening machine, Almen strips or even manganese steel plates.

When a part surface is shot blasted, it is rapidly impacted with a controlled stream of shot and abrasive material. This prepares the surface to meet the desired specifications. Shot blasting process is used by some companies in construction surface preparation such as final finishing of different types of flooring including concrete.

Type of Shot Media Used

A compressive stress layer is created to condition the parts of a material. In order to get compressive stress layer, high amount of tensile stress is required for failing surface material. Either a round or spherical media is used for shot blasting on various materials. The shot can either be sand, granules of silicon carbide or small steel balls. Compared to the surface of the target material, the shot media is usually harder. Broken shot should not be too high, therefore it is necessary to check the process on a continuous basis.

What is shot blasting mainly used for?

This process is mainly used for removal of scale, burrs and rust that tends to interfere with the appearance or integrity of the part. It removes surface contamination and prepares the surface for better coating adhesion.

What is Shot Blasting Wheelabration?

When a rapidly rotating wheel is used for delivering shot blast it is known as wheelabration service. In this procedure, shot media is propelled on the surface of the part in order to clean or prepare it. Wheelabration is quite useful for flash removal.

Difference between Sand Blasting and Shot Blasting

In a shot blast procedure, a turbine is used for getting acceleration for the abrasive. Blasting is used with mobile shot blasting, metals and various other machines. Machines for shot blast are mainly used for blasting walls, floors and drums.

In sandblasting process, abrasives are accelerated by steam from compressed air through an outflow or leakage from a blasting nozzle. This type of blasting process is used in chamber and cabins in hand blasting. The sand blast procedure is common in cleaning of rust and debris on surfaces that have to be painted or coated. Particles from the surface are chiseled with the use of sand or sharp edged elements. Sometimes, even a chipping hammer is brought into use.

Shot blasting as well as sand blasting is useful in getting a smooth surface in the right shape when the right equipments are used for removal of contamination on the surface of the material.

Carlsen is a professional avid blogger who writes articles related to latest technologies