Difference Between Link Belt And Industrial V Belt

In industrial arena both links belts as well as industrial v belts have their own place and significance. Our aim here will be to look at some of the main differences between them and also features both have.

Difference between Link and Industrial Belts

First of all let us look at link belts. According to link belts suppliers these have multiple polyester or polyurethane composite links that are held by use of metal studs.

The advantage of using them is that these are easier to install and provide improved resistance as compared to rubber belts. Apart from that they are also length adjustable with lower vibration and noise levels.

On the other hand the industrial v belts are useful for power transmissions and provide best combination of traction, load bearing and movement speed. The good thing about them is that they hardly slip off and properly set into the pulley.

Features of Both Types of Belts

Features – Link Belts

As per link belts suppliers since these belts are made up of links, these individual links add around 7/8" to overall length of these belts. Apart from that each individual sections is of about 2" in length. The main benefit of these belts is that it is easy to assemble them just using hands or with the help of needle nose pliers.

In addition to it, joining of ends and threading of belt on pulley are relatively easy tasks as compared to other installation methods. If belt is long then you can easily remove a link and do the opposite with relative ease if it is short.

Another feature they have is of absorption of vibration that is far more superior in comparison to other type of belts. The reason for less vibration is the presence of links which tend to move slightly thereby assisting in dissipation of forces that cause vibration. In addition to it they have superior flexibility which is not seen in V belts.

Features – Industrial V Belts

One of the main features of these industrial belts available in India is that if load increases then it begins to wedge and assists in facilitating torque transmission. Due to this reason less width and tension is required in comparison to flat belts.

Additionally, they have smaller center distance as well as higher reduction ratios. Apart from that they have greater center distance as compared to diameter of pulley. Another good thing about them is that they high speed range which is between 1,000– 7,000 ft per min.

What V Belts Are Made Of?

Some of the basic parts of these industrial belts produced in India consist of:

• Steel wires of endless type with no joints which help the belts achieve greater strength.

• The base rubber covers the wires and provides shape to belt.

• The protective cover protects the belt from high temperature getting generated from movement.

• In case you are planning to buy these belts then Polydrive.in is the best place to buy from. They have the largest stock of these belts for you to select from as per your requirements and needs. Polydrive can surely meet all your needs.

Read above article useful information & knowledge for you.